Mexico: rules and approvals
NOM certificates of conformity, issued by bodies such as NYCE and ANCE, allow customs clearance into Mexico, and the Secretaria de Economia oversees NOM enforcement.
The IS-04Z1 is an Ex mobile phone for people working inside classified areas at Mexican refineries, offshore platforms, petrochemical plants and fuel terminals. In 2025 the IFT was dissolved and replaced by the Agencia de Transformacion Digital y Telecomunicaciones, within which the Comision Reguladora de Telecomunicaciones now issues Certificates of Homologation. Distribution partners for Mexico are being identified ahead of the Q4 2026 launch of the IS-04Z1.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. Mexico has no appointed SAMS distributor yet: the IS-04Z1 is pre-launch (certification in progress, no certificate issued, launch planned for Q4 2026), and distributor applications are open.
For the record, no certificate exists for the IS-04Z1 today. The programme is under way ahead of a Q4 2026 launch. An operator's own vendor approval is a separate step. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Level of protection | ia, ib or ic matched to the zone | ib, for Zone 1 |
| Entity parameters | Uo, Io and Po within the device limits | Published with the certificate |
| Accessories | Chargers and cases certified with the device | Defined at certification |
| Where it applies | Mexico: Ciudad del Carmen, Coatzacoalcos and Minatitlán, Altamira, Tamaulipas | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Mexico. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
Operators and classified areas drawn from the SAMS Mexico market guide.
NOM certificates of conformity, issued by bodies such as NYCE and ANCE, allow customs clearance into Mexico, and the Secretaria de Economia oversees NOM enforcement.
The offshore Cantarell field was discovered in 1976, started production in 1979 and peaked in 2004, so ageing offshore infrastructure is a feature of Mexican upstream work.
Telecom and wireless products follow the PEC conformity assessment procedure, which results in a Certificate of Homologation, so older IFT references in supplier paperwork may be out of date.
Applicants are described as needing in-country testing in Mexico or at a laboratory recognised under a mutual recognition agreement, plus a local representative or importer.
Intrinsic safety limits the electrical and thermal energy in a circuit so that neither a spark nor a hot surface can ignite a gas or dust atmosphere, even when a fault occurs. The ib level, used for Zone 1, tolerates one fault. It is the usual way to make a handheld device that a worker carries continuously through a hazardous area.
The IS-04Z1 is designed on this principle for Zone 1 and Zone 21 (marking target II 2 G Ex ib IIC T4). Intrinsic safety is a design basis, not a certificate: certification is in progress and none has been issued yet.
In Mexico. Rounds on a Campeche platform, a Salina Cruz refinery unit or a Coatzacoalcos tank farm are short, repeated and often wet. An intrinsically safe handheld lets an inspector log readings and photograph a flange without hot-work style permits. Offshore rotations by helicopter or boat also favour a compact device that is not left on deck.
Distribution of the IS-04Z1 is by authorised partners only, and SAMS has not yet granted a territory for Mexico. Each application is reviewed on its merits. Because opening a certified Ex handset in an ordinary workshop invalidates its certificate, the partner must be able to support and service the device locally.
Not yet. The IS-04Z1 is pre-launch and its certification is still in progress ahead of a Q4 2026 launch. No unit goes into a classified area before the certificate covering it exists. The datasheet, the certification schedule and safe-area evaluation units are available now.
There is no list price yet. SAMS gives indicative pre-launch pricing in writing, against a stated quantity and site, and does not commit to a lead time before certification completes.
The circuits are designed to limit energy so a spark or hot surface cannot ignite a gas or dust atmosphere, even with one fault (level ib, Zone 1). Certification of that design is in progress.
The market guide for Mexico covers Dos Bocas, Tabasco, Bay of Campeche, Ciudad del Carmen, Coatzacoalcos and Minatitlán, among others. Site-level pages are linked below.
Apply through the distributor page with your company details and the territory you cover. SAMS reviews applications company by company and has not yet granted a territory for Mexico.
Not always. Mexico has telecom homologation and NOM schemes, and which applies depends on the product. Radio products generally need homologation, while some electrical products also need NOM certificates for customs clearance. Confirm both requirements with a Mexican certification body before shipping.
Typically Pemex offshore platforms in the Gulf of Mexico, onshore fields and gas processing plants, refineries such as Tula, and petrochemical complexes on the Gulf coast. Each operator issues its own classification, so request the area drawing and the gas group and temperature class before specifying equipment.
They are different systems. Mexican practice follows the American code, so Clase and División is common, while the IS-04Z1 is designed for Zone 1 and Zone 21 and has an NEC 500 route in progress. The mapping is a documentation matter, so confirm acceptance with the unidad de verificación and the plant.
Other guides for Mexico, other places in Mexico, and the pages behind them.
Send the site, zone and gas group and roughly how many handsets. We reply by email with the datasheet and the certification schedule.
Name the site and the operator and we will send what is available before launch.