The IS-04Z1 is an intrinsically safe Android handset designed for Zone 1 and Zone 21, aimed at the solvent suites and powder rooms of the Irish pharmaceutical cluster, and at the refinery, gas terminal and alumina plant that make up the rest. Directive 2014/34/EU replaced the earlier 94/9/EC equipment directive and became mandatory for manufacturers on 20 April 2016, so older Ex devices may carry earlier markings. Distribution partners for Ireland are being identified ahead of the Q4 2026 launch of the IS-04Z1.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. Ireland has no appointed SAMS distributor yet: the IS-04Z1 is pre-launch (certification in progress, no certificate issued, launch planned for Q4 2026), and distributor applications are open.
Status: pre-launch. IECEx, ATEX, UKEX and NEC 500 certification is in progress and no certificate has been issued; launch is planned for Q4 2026. A buyer's engineering review is separate from the certificate. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Ex marking | Group, category, protection concept, gas group, temperature class | II 2 G Ex ib IIC T4 (target) |
| Gas group | IIA, IIB or IIC matched to the area drawing | IIC (target) |
| Temperature class | T-class below the ignition temperature of the gas | T4, 135 °C (target) |
| Where it applies | Ireland: Little Island and Carrigaline, Shannon Estuary, Grange Castle and Clondalkin | Classified by the site operator |
An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Ireland. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
The main operators, industrial areas and sites that the SAMS Ireland market guide covers.
Under Directive 1999/92/EC employers must classify areas where explosive atmospheres may occur into zones, with the size and location depending on likelihood and persistence, so every Irish site has its own zoning document.
Corrib consists of subsea wells, offshore and onshore pipelines and an onshore gas processing plant at Bellanaboy, which began producing gas in 2015, a typical Zone 1 and Zone 2 process site.
Irving Oil runs Ireland's only oil refinery, at Whitegate in County Cork.
The Corrib gas field lies about 83 km off the north-west coast of County Mayo and is Ireland's only domestic source of natural gas, so the Mayo coast is the country's main upstream gas location.
“Ex-proof” is shorthand for equipment carrying an explosion-protection marking (the Ex mark) that matches the area it enters. The marking states the protection concept, gas or dust group and temperature class, and it must be backed by a certificate issued by a recognised body, so a phone described as Ex-proof should come with a certificate number you can check.
The IS-04Z1 is designed to carry the marking II 2 G Ex ib IIC T4. That is a target: certification is in progress, no certificate has been issued, and SAMS will publish the certificate numbers when they exist.
In Ireland. An Irish marking check would compare category, gas group, dust capability and temperature class with the zone plan for each room. Pharmaceutical solvent suites, distillery areas, milk powder driers and a gas terminal differ, and the operator's classification decides. The IS-04Z1 marking target is II 2 G Ex ib IIC T4.
A distributor for Ireland would carry the IS-04Z1 after certification completes; the Q4 2026 launch is the planning date and no appointment has been made. SAMS reviews applicants one by one and prefers companies with their own Ex-competent technical and service staff, since certified devices must not be repaired outside approved channels.
Not today. Until the certificates are issued the IS-04Z1 stays out of classified areas, and until launch there is nothing to purchase. You can ask for the datasheet and the certification schedule, or book a safe-area evaluation unit.
No price is published. While certification is in progress there is no list price and no committed lead time, and a supplier quoting a firm figure for an uncertified Ex handset is promising something it cannot stand behind. Indicative pre-launch pricing is issued in writing against a stated quantity and site.
The marking target is II 2 G Ex ib IIC T4. It becomes a marking only when the certificate is issued; until then it is a design target.
The market guide for Ireland covers Ringaskiddy, Whitegate, Little Island and Carrigaline, Shannon Estuary, among others. Site-level pages are linked below.
Apply through the distributor page with your company details and the territory you cover. SAMS reviews applications company by company and has not yet granted a territory for Ireland.
Atlantic coastal sites are often wet, windy and salt-laden, which stresses seals and charging contacts. Check the water ingress rating, the lowest ambient temperature on the certificate and whether the touchscreen works with wet gloves. Spare batteries are worthwhile for long outdoor shifts.
Ireland is an EU member, so ATEX Directive 2014/34/EU applies to equipment and Directive 1999/92/EC to workplace zoning. Zone 1 and Zone 2 devices should carry CE and Ex markings. Individual plants typically add their own permit-to-work and equipment registration processes.
ATEX is the usual reference in the EU and is applied in Ireland through national regulations. Multinational sites may also ask for IECEx. Ask the operator which evidence it requires, and check the certification status, as the IS-04Z1 certification programme is still in progress.
More on Ireland, and on other places in Ireland.
Share the site details and quantity. You will get the datasheet and the certification schedule back by email; pricing is indicative only until launch.
Name the site and the operator and we will send what is available before launch.
