Czech Republic: infrastructure
The Ingolstadt-Kralupy-Litvínov pipeline can bring crude oil from Germany and can be connected to the Transalpine pipeline, so crude arrives through pipeline terminals rather than seaports.
The IS-04Z1 is an intrinsically safe Android handset designed for Zone 1 and Zone 21, built for Czech refineries, chemical plants, tank farms and coke ovens rather than for a catalogue. Gas use was 9.4 billion cubic metres in 2021 and 7.1 billion in 2023, so gas distribution and industrial gas burners remain widespread across Czech industry. An Ex-proof cell phone distributor in Czech Republic would carry the IS-04Z1 to these buyers once certification completes.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. Czech Republic has no appointed SAMS distributor yet: the IS-04Z1 is pre-launch (certification in progress, no certificate issued, launch planned for Q4 2026), and distributor applications are open.
Status: pre-launch. IECEx, ATEX, UKEX and NEC 500 certification is in progress and no certificate has been issued; launch is planned for Q4 2026. A buyer's engineering review is separate from the certificate. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Ex marking | Group, category, protection concept, gas group, temperature class | II 2 G Ex ib IIC T4 (target) |
| Gas group | IIA, IIB or IIC matched to the area drawing | IIC (target) |
| Temperature class | T-class below the ignition temperature of the gas | T4, 135 °C (target) |
| Where it applies | Czech Republic: Neratovice, Valašské Meziříčí, Pardubice | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Czech Republic. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
The main operators, industrial areas and sites that the SAMS Czech Republic market guide covers.
The Ingolstadt-Kralupy-Litvínov pipeline can bring crude oil from Germany and can be connected to the Transalpine pipeline, so crude arrives through pipeline terminals rather than seaports.
The Gazela pipeline connects Czech gas supply through Germany at Brandov or Rozvadov and through Slovakia at Lanžhot, so compressor and metering stations sit near the borders.
In 2022 electricity production was 78.8 TWh, of which 53.6% came from fossil fuels, mostly lignite, and 40.95% from nuclear, so coal-handling plants and power stations are typical dust and gas sites.
ATEX equipment is split into Group I for mining and Group II for surface industries, which matters in a country with coal mining as well as refining and chemicals.
“Ex-proof” is shorthand for equipment carrying an explosion-protection marking (the Ex mark) that matches the area it enters. The marking states the protection concept, gas or dust group and temperature class, and it must be backed by a certificate issued by a recognised body, so a phone described as Ex-proof should come with a certificate number you can check.
The IS-04Z1 is designed to carry the marking II 2 G Ex ib IIC T4. That is a target: certification is in progress, no certificate has been issued, and SAMS will publish the certificate numbers when they exist.
In Czech Republic. A marking check at a Czech plant would read the certificate number, the issuing body and the complete marking string, which will be published so they can be checked. The target is II 2 G Ex ib IIC T4, with Zone 21 dust in the same programme, which matters at a fertiliser or coking site where powder and gas areas are close.
A distributor for Czech Republic would carry the IS-04Z1 after certification completes; the Q4 2026 launch is the planning date and no appointment has been made. SAMS reviews applicants one by one and prefers companies with their own Ex-competent technical and service staff, since certified devices must not be repaired outside approved channels.
Not today. Until the certificates are issued the IS-04Z1 stays out of classified areas, and until launch there is nothing to purchase. You can ask for the datasheet and the certification schedule, or book a safe-area evaluation unit.
There is no list price yet. SAMS gives indicative pre-launch pricing in writing, against a stated quantity and site, and does not commit to a lead time before certification completes.
The marking target is II 2 G Ex ib IIC T4. It becomes a marking only when the certificate is issued; until then it is a design target.
The market guide for Czech Republic covers Litvínov and Záluží, Kralupy nad Vltavou, Neratovice, Valašské Meziříčí, among others. Site-level pages are linked below.
Apply through the distributor page with your company details and the territory you cover. SAMS reviews applications company by company and has not yet granted a territory for Czech Republic.
Yes. ATEX separates Group I equipment for mining from Group II for surface industries, and methane and coal dust conditions underground differ from refinery gas and vapour. Check the Group marking on any device against the area and the mine operator's own approval process.
Crude arrives by pipeline from Germany and Italy, with storage at depots such as Nelahozeves, so many classified areas are at pumping and storage sites rather than ports. Terminal operators run their own induction and device registration, so schedule approvals early for shutdown work.
Czech law expects the instructions in Czech, so the manual, safe-use guidance and declaration of conformity are planned in Czech alongside English, with a Czech interface on Android 16. That is planned into the launch rather than translated afterwards. Certification is in progress. Check requirements with your safety officer.
More on Czech Republic, and on other places in Czech Republic.
Tell us what you need to equip and where. The SAMS team answers by email with the datasheet and where each certification route stands.
Tell us the zone, gas group and operator. We will send the datasheet and the certification schedule.