Qatar: logistics and access
Hamad Port, south of Doha near Mesaieed, became operational in December 2016 and is Qatar's main seaport, carrying largely food and building materials.
The North Field, found in 1971, is the world's biggest natural gas field, covering about 6,000 square kilometres offshore, and it supplies the plants at Ras Laffan. Launch is Q4 2026, so today we can share the specification, the certification schedule and an evaluation unit. This page sets out how an ATEX and IECEx smartphone supply route to Qatar will work for the IS-04Z1, and what is and is not available before launch.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. An ATEX and IECEx smartphone for Qatar cannot be bought yet: the SAMS IS-04Z1 is pre-launch (certification in progress, no certificate issued), and the datasheet, certification schedule and safe-area evaluation units are available now.
Status: pre-launch. IECEx, ATEX, UKEX and NEC 500 certification is in progress and no certificate has been issued; launch is planned for Q4 2026. An operator's own vendor approval is a separate step. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Marking | II 2 G Ex ib IIC T4 on the rating plate | Design target; not yet marked |
| EU-type examination certificate | Notified body number and certificate ID | In progress with TÜV; not issued |
| IECEx certificate of conformity | Number listed on the IECEx online register | In progress; not issued |
| Where it applies | Qatar: Halul Island, Al-Shaheen, Ras Laffan Industrial City | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Qatar. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
The classified areas, operators and sites below are the ones covered in the SAMS Qatar market guide.
Hamad Port, south of Doha near Mesaieed, became operational in December 2016 and is Qatar's main seaport, carrying largely food and building materials.
Mesaieed was established in 1949 as a tanker terminal and was Qatar's only deepwater port for more than 20 years; it is 36 km south of Doha.
Ras Laffan Industrial City, 80 km north of Doha, is Qatar's main site for liquefied natural gas and gas-to-liquids, hosting Pearl GTL, ORYX GTL, QatarEnergy LNG plants and the Laffan Refinery.
More than 80 percent of Qatar's inhabitants live in Doha, while the industrial cities of Ras Laffan, 80 km north, and Mesaieed, 36 km south, are separate sites administered by QatarEnergy.
ATEX is the European legal framework for equipment used in explosive atmospheres (Directive 2014/34/EU). IECEx is the international certification scheme built on the IEC 60079 standards. Buyers outside Europe often ask for both: an IECEx certificate is the technical evidence most national regimes build on, while ATEX is the legal route into the European market.
For the IS-04Z1 both routes are in progress with TÜV in Germany and neither certificate has been issued. The marking target is II 2 G Ex ib IIC T4: equipment Group II (surface industry), Category 2 (Zone 1 gas), protection concept ib (intrinsic safety), gas group IIC and temperature class T4.
In Qatar. A Qatari technical reviewer at QatarEnergy or its Ras Laffan and Mesaieed operators would expect an IECEx Certificate of Conformity first, with ATEX 2014/34/EU evidence beside it. A dual route helps the international EPCs and contractors working inside the industrial cities. Both are in progress, MOCI conformity and CRA radio approval are separate, and none is granted.
Supply of the IS-04Z1 to Qatar starts only after certification, through authorised distributors. Until then a buyer can request the datasheet and the written certification schedule, and arrange a safe-area evaluation unit, which puts the site on the list for the right local channel at launch.
The technical specification, marking target and conditions of use, sent by email.
Which certificates are in progress, in what order, and what is still to be confirmed.
Evaluation units can be used for connectivity, MDM enrolment and workflow testing outside classified areas.
Tell us the site, zone, gas group and quantity so the right authorised distributor can contact you.
Not today. Until the certificates are issued the IS-04Z1 stays out of classified areas, and until launch there is nothing to purchase. You can ask for the datasheet and the certification schedule, or book a safe-area evaluation unit.
There is no list price yet. SAMS gives indicative pre-launch pricing in writing, against a stated quantity and site, and does not commit to a lead time before certification completes.
Not yet. Both routes are in progress with TÜV in Germany and no certificate has been issued. Any listing that says otherwise is wrong.
The market guide for Qatar covers Ras Laffan Industrial City, Mesaieed Industrial Area, North Field, Dukhan, among others. Site-level pages are linked below.
Through authorised distributors once certificates exist. Until then SAMS can send the datasheet and certification schedule and arrange safe-area evaluation units.
Industrial cities typically have gate and permit systems run by their administration and plant operators. Contractors normally need sponsorship and induction, so ask your host.
Ras Laffan Industrial City in the north for LNG, gas-to-liquids and refining, and Mesaieed Industrial City in the south, a prime industrial zone and tanking centre. Both are administered by QatarEnergy subsidiaries.
The radio inside the handset needs separate CRA type approval, and conformity for the imported product is administered by the Ministry of Commerce and Industry. Both sit inside the launch programme and neither has been granted. Confirm with the site operator which evidence is needed before bringing a device in.
Related guides for Qatar and for Qatar.
Send the site, zone and gas group and roughly how many handsets. We reply by email with the datasheet and the certification schedule.
Tell us the zone, gas group and operator. We will send the datasheet and the certification schedule.