Skip to content
Certification In Progress · Launching Q4 2026 Become a Distributor
Certification In Progress · Launching Q4 2026 Product Certifications Industries Blog About Contact Become a Distributor
Portugal · ATEX and IECEx

ATEX and IECEx Smartphone Supplier in Portugal

The IS-04Z1 is an intrinsically safe Android handset designed for Zone 1 and Zone 21, aimed at the refining and polymer complex at Sines, the chemical plants at Estarreja and the pulp, cement and mining sites in between. Buyers searching for an ATEX and IECEx smartphone supplier for Portugal can take the datasheet and the certification schedule for the IS-04Z1 now; supply follows certification.

Pre-launch · certification in progress · Launching Q4 2026

SAMS IS-04Z1 intrinsically safe smartphone for Portugal, front view
Marking targetEx ib IIC T4Intrinsic safety, Zone 1 / 21 design target · certification in progress
AvailabilityQ4 2026via authorised distributors
Search topicATEX and IECEx
DeviceSmartphone
RouteSupply
WherePortugal

Short answer. An ATEX and IECEx smartphone for Portugal cannot be bought yet: the SAMS IS-04Z1 is pre-launch (certification in progress, no certificate issued), and the datasheet, certification schedule and safe-area evaluation units are available now.

Where things stand: the IS-04Z1 has not launched, and none of its four certification routes has produced a certificate yet. An operator's own vendor approval is a separate step. Certification status. Place facts reviewed October 2026.

At a glance · ATEX and IECEx

Checklist: ATEX and IECEx smartphone for Portugal

Specification checklist against the IS-04Z1 today
CheckWhat to look forIS-04Z1 today
MarkingII 2 G Ex ib IIC T4 on the rating plateDesign target; not yet marked
EU-type examination certificateNotified body number and certificate IDIn progress with TÜV; not issued
IECEx certificate of conformityNumber listed on the IECEx online registerIn progress; not issued
Where it appliesPortugal: Setúbal and the Sado, Figueira da Foz, SinesClassified by the site operator
Product · Portugal

The product behind this search: the SAMS IS-04Z1.

SAMS IS-04Z1 explosion proof mobile phone, front view

SAMS IS-04Z1

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Portugal. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.

  • IP68 sealed
  • 4,000 mAh battery
  • 50 MP camera
  • Android 16
  • Zone 1 / Zone 21 design target
The market · Portugal

Hazardous-area industry in Portugal

The main operators, industrial areas and sites that the SAMS Portugal market guide covers.

Operators, EPCs and contractors

Galp
Sines refinery, the only one in Portugal, plus fuel terminals.
Repsol Polímeros
Sines polymer complex, recently expanded with two new plants.
Bondalti
Estarreja chemical complex and a rebuilt chlor-alkali plant.
Dow Portugal
Chemical production inside the Estarreja industrial complex.
REN Atlântico
Operates the Sines LNG terminal and the national gas network.
The Navigator Company
Pulp and paper mills at Figueira da Foz, Setúbal and Aveiro.

Industrial areas and sites

Sines
Refinery, polymer complex, LNG terminal and petrochemical berths.
ZILS Alentejo
Industrial estate behind the port, hydrogen and data investment.
Estarreja
Chemical complex north of Aveiro, chlorine and derivatives.
Matosinhos and Leça
Former refinery site, now fuel storage and distribution.
Setúbal and the Sado
Cement, pulp, chemicals and river jetties south of Lisbon.
Figueira da Foz
Pulp and paper mills with large powder handling areas.
Field notes · Portugal

More about Portugal that matters for portable equipment

Portugal: infrastructure

The Sines LNG import terminal has three storage tanks with a total capacity of 390,000 cubic metres and regasification capacity of 5.6 million tonnes a year, making Sines Portugal's key gas import site.

Portugal: logistics and access

In 2000 about 85% of Portugal's energy was imported, so most fuel and gas reaches the country through port terminals rather than domestic fields.

Portugal: industry on the ground

Sines on the Atlantic coast hosts an important oil refinery and several petrochemical industries.

Portugal: projects and investment

Portugal aims to cover 80% of electricity consumption with renewables by 2030 and has developed a hydrogen strategy to reduce gas imports, which may add hydrogen-classified areas.

The term · ATEX and IECEx

What “ATEX and IECEx” means for a smartphone

ATEX is the European legal framework for equipment used in explosive atmospheres (Directive 2014/34/EU). IECEx is the international certification scheme built on the IEC 60079 standards. Buyers outside Europe often ask for both: an IECEx certificate is the technical evidence most national regimes build on, while ATEX is the legal route into the European market.

For the IS-04Z1 both routes are in progress with TÜV in Germany and neither certificate has been issued. The marking target is II 2 G Ex ib IIC T4: equipment Group II (surface industry), Category 2 (Zone 1 gas), protection concept ib (intrinsic safety), gas group IIC and temperature class T4.

In Portugal. A Portuguese HSE or procurement reviewer at Galp, Bondalti or REN Atlântico would expect ATEX evidence, with the certification programme running now, and IECEx alongside for international contractors on Sines and Estarreja projects. Both are in progress and no certificate is issued. Ask for written evidence and the precise marking string.

The route · supply

Sourcing the IS-04Z1 for Portugal

There is no stock to order for Portugal yet. The IS-04Z1 is pre-launch, certification is in progress, and supply will run through authorised distributors after the certificates are issued. Procurement teams can prepare now with the datasheet, the certification schedule and a safe-area evaluation.

  1. 01

    Request the datasheet

    The technical specification, marking target and conditions of use, sent by email.

  2. 02

    Ask for the certification schedule

    Which certificates are in progress, in what order, and what is still to be confirmed.

  3. 03

    Evaluate in a safe area

    Evaluation units can be used for connectivity, MDM enrolment and workflow testing outside classified areas.

  4. 04

    Register for launch

    Tell us the site, zone, gas group and quantity so the right authorised distributor can contact you.

Questions · Portugal

Frequently asked questions

Can we buy an ATEX and IECEx smartphone in Portugal today?

No. Nothing can be bought or taken into a classified area today: certification is in progress and launch is planned for Q4 2026. What is available now is the datasheet, the written certification schedule and evaluation units for safe-area use.

What does an ATEX and IECEx smartphone in Portugal cost?

No price is published. While certification is in progress there is no list price and no committed lead time, and a supplier quoting a firm figure for an uncertified Ex handset is promising something it cannot stand behind. Indicative pre-launch pricing is issued in writing against a stated quantity and site.

Is the IS-04Z1 ATEX and IECEx certified?

Not yet. Both routes are in progress with TÜV in Germany and no certificate has been issued. Any listing that says otherwise is wrong.

Which sites in Portugal does this cover?

The market guide for Portugal covers Sines, ZILS Alentejo, Estarreja, Matosinhos and Leça, among others. Site-level pages are linked below.

How will SAMS supply Portugal?

Through authorised distributors once certificates exist. Until then SAMS can send the datasheet and certification schedule and arrange safe-area evaluation units.

Does Portugal follow ATEX for handheld devices?

Portugal is an EU member, so ATEX Directive 2014/34/EU applies to equipment and Directive 1999/92/EC to workplace zoning. Zone 1 and Zone 2 devices should carry CE and Ex markings with instructions in Portuguese where required. Operators usually add their own permit and registration procedures.

Why is Sines important for hazardous-area work in Portugal?

Sines hosts Portugal's LNG import terminal, with three storage tanks totalling 390,000 cubic metres and a regasification capacity of 5.6 million tonnes a year. Terminal and port operators set their own induction and device rules, so confirm them before sending equipment.

Is dust protection part of the programme?

Yes, Zone 21 dust protection belongs to the same certification programme as the gas marking. In pulp, cement and mineral processing the powder area is the plant, not a corner of it, so check the final certificate and the site's own dust classification with the operator.

Enquiry · Portugal

Ask about the IS-04Z1 for Portugal

Share the site details and quantity. You will get the datasheet and the certification schedule back by email; pricing is indicative only until launch.

Enquiry · Portugal

Please enter your name.
Please enter your company name.
Enter a valid email address.
Please enter your target market.
Please select one.

Launching Q4 2026

Planning for Portugal?

Name the site and the operator and we will send what is available before launch.