Kuwait: geography and layout
Kuwait covers 17,820 square kilometres, about 200 km north to south and 170 km east to west, with 195 km of coastline.
The IS-04Z1 is an intrinsically safe handset for people who cross into classified areas in Kuwait every shift: gathering centre operators, refinery crews, inspection engineers and the HSE and telecoms teams who equip them. Buyers searching for an ATEX and IECEx smartphone supplier for Kuwait can take the datasheet and the certification schedule for the IS-04Z1 now; supply follows certification.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. An ATEX and IECEx smartphone for Kuwait cannot be bought yet: the SAMS IS-04Z1 is pre-launch (certification in progress, no certificate issued), and the datasheet, certification schedule and safe-area evaluation units are available now.
For the record, no certificate exists for the IS-04Z1 today. The programme is under way ahead of a Q4 2026 launch. Operator approval runs on its own timeline. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Marking | II 2 G Ex ib IIC T4 on the rating plate | Design target; not yet marked |
| EU-type examination certificate | Notified body number and certificate ID | In progress with TÜV; not issued |
| IECEx certificate of conformity | Number listed on the IECEx online register | In progress; not issued |
| Where it applies | Kuwait: Al-Zour, Shuaiba, Ahmadi | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Kuwait. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
The main operators, industrial areas and sites that the SAMS Kuwait market guide covers.
Kuwait covers 17,820 square kilometres, about 200 km north to south and 170 km east to west, with 195 km of coastline.
Kuwait's Public Authority for Industry handles the safety registration route for electrical products, with a product registration that typically takes about a week.
CITRA type approval for wired and wireless equipment accepts CE marking and EU test standards, needs no local representative, normally takes about six weeks and lasts three years.
Summer daily highs average 42 to 46 degrees Celsius and the record is 54 degrees at Mitribah in July 2016, so heat is a constant factor for outdoor equipment.
ATEX is the European legal framework for equipment used in explosive atmospheres (Directive 2014/34/EU). IECEx is the international certification scheme built on the IEC 60079 standards. Buyers outside Europe often ask for both: an IECEx certificate is the technical evidence most national regimes build on, while ATEX is the legal route into the European market.
For the IS-04Z1 both routes are in progress with TÜV in Germany and neither certificate has been issued. The marking target is II 2 G Ex ib IIC T4: equipment Group II (surface industry), Category 2 (Zone 1 gas), protection concept ib (intrinsic safety), gas group IIC and temperature class T4.
In Kuwait. A Kuwaiti procurement or HSE reviewer at an operator such as Kuwait Oil Company or KIPIC would expect certificate evidence tied to the local programme: IECEx and KUCAS are in progress for the IS-04Z1, with ATEX 2014/34/EU alongside. A dual route also helps international contractors such as Petrofac, who move between Kuwaiti and overseas scopes and want one marking that both audiences understand.
Nothing can be bought for Kuwait today: the IS-04Z1 is pre-launch, and SAMS will supply end users through authorised distributors once certificates exist. What a buyer can do now is take the specification, ask for the written certification schedule and arrange a safe-area evaluation, so that the right local channel contacts you at launch.
The technical specification, marking target and conditions of use, sent by email.
Which certificates are in progress, in what order, and what is still to be confirmed.
Evaluation units can be used for connectivity, MDM enrolment and workflow testing outside classified areas.
Tell us the site, zone, gas group and quantity so the right authorised distributor can contact you.
No. Nothing can be bought or taken into a classified area today: certification is in progress and launch is planned for Q4 2026. What is available now is the datasheet, the written certification schedule and evaluation units for safe-area use.
No price is published. While certification is in progress there is no list price and no committed lead time, and a supplier quoting a firm figure for an uncertified Ex handset is promising something it cannot stand behind. Indicative pre-launch pricing is issued in writing against a stated quantity and site.
Not yet. Both routes are in progress with TÜV in Germany and no certificate has been issued. Any listing that says otherwise is wrong.
The market guide for Kuwait covers Ahmadi, Greater Burgan, Mina Al-Ahmadi, Mina Abdullah, among others. Site-level pages are linked below.
Through authorised distributors once certificates exist. Until then SAMS can send the datasheet and certification schedule and arrange safe-area evaluation units.
Greater Burgan in the south-east, with Magwa and Ahmadi sub-fields, around Al Ahmadi. Refineries at Mina Al-Ahmadi and Mina Abdullah are in the same coastal belt south of Kuwait City.
Yes, summer highs average 42 to 46 degrees Celsius and record 54. Use devices rated for high ambient temperature, and avoid leaving them in vehicles or direct sun.
IP68 sealing is designed to keep dust out, and the build is rugged. Heat is a separate question: the certified ambient range and T4 class are fixed by the certificate, which is not yet issued. Compare the published range with your site maximum, and confirm with the operator before planning summer use.
Related guides for Kuwait and for Kuwait.
Share the site details and quantity. You will get the datasheet and the certification schedule back by email; pricing is indicative only until launch.
Name the site and the operator and we will send what is available before launch.