Skip to content
Certification In Progress · Launching Q4 2026 Become a Distributor
Certification In Progress · Launching Q4 2026 Product Certifications Industries Blog About Contact Become a Distributor
Wales · ATEX and IECEx

ATEX and IECEx Smartphone in Wales

The Milford Haven Waterway in Pembrokeshire is Wales' largest port and a major energy hub. It hosts Valero's Pembroke refinery and the South Hook and Dragon LNG terminals, so Zone 1 work arises at process units, tank farms and gas handling areas. If you are specifying an ATEX and IECEx smartphone for Wales (Milford Haven Waterway), this page covers the markings, the approvals and the current certification status of the IS-04Z1.

Pre-launch · certification in progress · Launching Q4 2026

SAMS IS-04Z1 intrinsically safe smartphone for Wales, front view
Marking targetEx ib IIC T4Intrinsic safety, Zone 1 / 21 design target · certification in progress
AvailabilityQ4 2026via authorised distributors
Search topicATEX and IECEx
DeviceSmartphone
RouteSpecification
WhereWales

Short answer. The SAMS IS-04Z1 is the intrinsically safe smartphone covered here for Wales (Milford Haven Waterway): pre-launch, designed for Zone 1 and Zone 21 (marking target Ex ib IIC T4), with certification in progress and no certificate issued.

Status: pre-launch. IECEx, ATEX, UKEX and NEC 500 certification is in progress and no certificate has been issued; launch is planned for Q4 2026. A buyer's engineering review is separate from the certificate. Certification status. Place facts reviewed October 2026.

At a glance · ATEX and IECEx

Checklist: ATEX and IECEx smartphone for Wales (Milford Haven Waterway)

What to check, and where the IS-04Z1 stands today
CheckWhat to look forIS-04Z1 today
MarkingII 2 G Ex ib IIC T4 on the rating plateDesign target; not yet marked
EU-type examination certificateNotified body number and certificate IDIn progress with TÜV; not issued
IECEx certificate of conformityNumber listed on the IECEx online registerIn progress; not issued
Where it appliesWales (Milford Haven Waterway): Refinery process units, LNG storage and regasification, Crude and product jettiesClassified by the site operator
Product · Wales

The product behind this search: the SAMS IS-04Z1.

SAMS IS-04Z1 explosion proof mobile phone, front view

SAMS IS-04Z1

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Wales. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.

  • IP68 sealed
  • 4,000 mAh battery
  • 50 MP camera
  • Android 16
  • Zone 1 / Zone 21 design target
The site · Wales (Milford Haven Waterway)

Wales (Milford Haven Waterway): where the IS-04Z1 would work

Who operates there and which kinds of classified area a handset would meet, from the SAMS site research.

Operators and companies on site

  • Valero
  • South Hook LNG Terminal Company
  • Milford Haven Port Authority

Classified areas to expect

  • Refinery process units
  • LNG storage and regasification
  • Crude and product jetties
  • Tank farms
Local conditions · Wales (Milford Haven Waterway)

What Wales (Milford Haven Waterway) means for portable equipment

Refining

The Pembroke refinery began operating in 1964 and has been owned by Valero since 2011. Cardiff terminal supply by coastal tanker comes from here.

LNG

South Hook, opened in 2009 with five storage tanks, is described as Europe's largest LNG terminal. With Dragon LNG, the two terminals can provide up to a quarter of UK gas demand.

Field notes · Wales (Milford Haven Waterway)

More about Wales (Milford Haven Waterway) that matters for portable equipment

Wales (Milford Haven Waterway): industry on the ground

Oil refining at Milford Haven began with the first oil terminal and refinery in 1960, and the waterway still carries the jetties, oil terminals and shore processing facilities of the oil and power industries.

Wales (Milford Haven Waterway): infrastructure

Regasified LNG leaves Milford Haven through National Grid's South Wales Gas Pipeline to a distribution point at Tirley in Gloucestershire, so pipeline and compression sites run across south Wales.

Wales (Milford Haven Waterway): projects and investment

By 2018 Wales generated over 3,864 MW of renewable energy from 68,728 projects, and the Welsh Government set a target of meeting 70% of electricity demand from Welsh renewables by 2030.

Wales (Milford Haven Waterway): logistics and access

Milford Haven is the largest port in Wales and the third-largest in the United Kingdom, run by the Milford Haven Port Authority as a trust port that manages Milford Docks, Milford Marina and Pembroke Port.

The term · ATEX and IECEx

What “ATEX and IECEx” means for a smartphone

ATEX is the European legal framework for equipment used in explosive atmospheres (Directive 2014/34/EU). IECEx is the international certification scheme built on the IEC 60079 standards. Buyers outside Europe often ask for both: an IECEx certificate is the technical evidence most national regimes build on, while ATEX is the legal route into the European market.

For the IS-04Z1 both routes are in progress with TÜV in Germany and neither certificate has been issued. The marking target is II 2 G Ex ib IIC T4: equipment Group II (surface industry), Category 2 (Zone 1 gas), protection concept ib (intrinsic safety), gas group IIC and temperature class T4.

In Wales (Milford Haven Waterway). A reviewer at the Milford Haven Waterway would expect equipment evidence matching the operator's DSEAR assessment. Valero's refinery and the LNG terminals draw international contractors, particularly for turnarounds, so a dual ATEX and IECEx route is designed to help. Both certifications remain in progress for SAMS and neither has been issued.

The route · specification

Specifying an ATEX and IECEx smartphone for Wales

A short checklist for anyone writing or reviewing the specification, with the IS-04Z1 status against each point.

Check on the paper

Marking
Equipment group, category, protection concept, gas group and temperature class, matched to the area drawing.
Certificate and schedule
A certificate number, issuing body and the schedule of conditions, not a brochure claim.
Standards edition
The IEC 60079 or national standard edition the certificate was issued against.

Check for the IS-04Z1

Marking target
II 2 G Ex ib IIC T4: a target, not yet a certificate.
Certificate status
IECEx, ATEX, UKEX and NEC 500 in progress; none issued.
Operator approval
Separate from the certificate and handled with the site operator.
Questions · Wales

Frequently asked questions

Can we buy an ATEX and IECEx smartphone in Wales today?

Not yet. The IS-04Z1 is pre-launch and its certification is still in progress ahead of a Q4 2026 launch. No unit goes into a classified area before the certificate covering it exists. The datasheet, the certification schedule and safe-area evaluation units are available now.

What does an ATEX and IECEx smartphone in Wales cost?

There is no list price yet. SAMS gives indicative pre-launch pricing in writing, against a stated quantity and site, and does not commit to a lead time before certification completes.

Is the IS-04Z1 ATEX and IECEx certified?

Not yet. Both routes are in progress with TÜV in Germany and no certificate has been issued. Any listing that says otherwise is wrong.

Which areas at Wales (Milford Haven Waterway) would use it?

Likely candidates are refinery process units, lng storage and regasification, crude and product jetties, tank farms. Which areas are classified, and to what zone, is set by the site operator's own area classification drawings.

Is intrinsically safe the same as explosion proof?

Not exactly. Explosion proof is a broad everyday term; intrinsic safety is one protection concept, which limits energy so ignition cannot occur. Flameproof (Ex d) is a different concept that contains an explosion. The IS-04Z1 is intrinsically safe by design.

Do Welsh sites follow the same Ex marking rules as the rest of Great Britain?

Yes, Wales is within Great Britain's product rules, where equipment for explosive atmospheres is normally supplied with UKCA marking and CE-marked ATEX equipment has been widely accepted under transitional arrangements. Check the current position and any site-specific rules with the operator before supplying handheld devices.

How does the Welsh climate affect devices used outdoors?

Wales is mild but wet and windy, with salt spray at coastal terminals such as Milford Haven. Ingress protection, corrosion resistance and condensation tolerance are more important than extreme temperature ratings. Ask the site about its own environmental requirements for portable electronics.

What hazardous-area work is there in Wales?

The Milford Haven Waterway in Pembrokeshire hosts Valero's Pembroke refinery, which began operating in 1964, and the South Hook and Dragon LNG terminals. Zone 1 work arises at process units, tank farms and gas handling areas. Confirm requirements with each operator's HSE and procurement teams.

Enquiry · Wales (Milford Haven Waterway)

Ask about the IS-04Z1 for Wales (Milford Haven Waterway), United Kingdom

Send the site, zone and gas group and roughly how many handsets. We reply by email with the datasheet and the certification schedule.

Enquiry · Wales (Milford Haven Waterway)

Please enter your name.
Please enter your company name.
Enter a valid email address.
Please enter your target market.
Please select one.

Launching Q4 2026

Planning for Wales?

Send the zone and gas group of your site and we will reply with the datasheet and schedule.