Australia: rules and approvals
An IECEx certificate for an assembly of several items is not automatically accepted unless it is validated against the current AS/NZS 60079.14 or the assembly is independently inspected.
Australia · ATEX and IECEx
ATEX and IECEx Smartphone Distributor in Australia
A Zone 1 / Zone 21 smartphone for crews on Australian LNG trains, offshore facilities, processing plants and remote mine sites. An ATEX marking alone is not automatically accepted, because ATEX is an EU directive that allows self-declaration for some categories, and such equipment usually needs a conformity assessment. An ATEX and IECEx smartphone distributor in Australia would carry the IS-04Z1 to these buyers once certification completes.
Pre-launch · certification in progress · Launching Q4 2026
Marking targetEx ib IIC T4Intrinsic safety, Zone 1 / 21 design target · certification in progress
AvailabilityQ4 2026via authorised distributors
Search topicATEX and IECEx
DeviceSmartphone
RouteDistribution
WhereAustralia
Short answer. Australia has no appointed SAMS distributor yet: the IS-04Z1 is pre-launch (certification in progress, no certificate issued, launch planned for Q4 2026), and distributor applications are open.
Current position: certification in progress, nothing issued, launch targeted for Q4 2026. A buyer's engineering review is separate from the certificate. Certification status. Place facts reviewed October 2026.
At a glance · ATEX and IECEx
Checklist: ATEX and IECEx smartphone for Australia
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Marking | II 2 G Ex ib IIC T4 on the rating plate | Design target; not yet marked |
| EU-type examination certificate | Notified body number and certificate ID | In progress with TÜV; not issued |
| IECEx certificate of conformity | Number listed on the IECEx online register | In progress; not issued |
| Where it applies | Australia: Darwin, Gladstone and Curtis Island, Bowen Basin, Queensland | Classified by the site operator |
Product · Australia
The product behind this search: the SAMS IS-04Z1.
SAMS IS-04Z1
An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Australia. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
- IP68 sealed
- 4,000 mAh battery
- 50 MP camera
- Android 16
- Zone 1 / Zone 21 design target
The market · Australia
Where an Ex phone is used in Australia
Operators and classified areas drawn from the SAMS Australia market guide.
Operators, EPCs and contractors
- Woodside Energy
- North West Shelf, Pluto LNG and the Karratha Gas Plant
- Chevron Australia
- Gorgon on Barrow Island and Wheatstone at Onslow
- INPEX
- Ichthys LNG at Darwin and Browse Basin facilities
- Shell Australia
- Prelude FLNG and QCLNG on Curtis Island
- Santos
- GLNG at Gladstone and the Moomba gas plant
- ConocoPhillips and Origin Energy
- Australia Pacific LNG and Surat Basin coal seam gas
Industrial areas and sites
- Karratha and the Burrup Peninsula
- Karratha Gas Plant, Pluto LNG and offshore support
- Onslow, Western Australia
- Wheatstone LNG and the Ashburton North estate
- Darwin
- Ichthys LNG, marine supply base and harbour work
- Gladstone and Curtis Island
- Three LNG trains plus alumina and coal wharves
- Bowen Basin, Queensland
- Coal mining, methane drainage and handling plants
- Pilbara, Western Australia
- Iron ore mines, workshops and bulk fuel handling
Field notes · Australia
More about Australia that matters for portable equipment
Australia: rules and approvals
Australia works on the IECEx scheme and the AS/NZS 60079 series, and the national ANZEx scheme is harmonised with IECEx, so IECEx-certified equipment can be used almost without separate national testing.
Australia: rules and approvals
The Australian Communications and Media Authority regulates the supply of radiocommunications equipment and made rule changes in 2023 to simplify and streamline that regulation.
Australia: people and language
The Pilbara has more than 45,000 residents, most living in the western third in towns such as Port Hedland, Karratha and Wickham, while the eastern third is almost entirely desert.
The term · ATEX and IECEx
What “ATEX and IECEx” means for a smartphone
ATEX is the European legal framework for equipment used in explosive atmospheres (Directive 2014/34/EU). IECEx is the international certification scheme built on the IEC 60079 standards. Buyers outside Europe often ask for both: an IECEx certificate is the technical evidence most national regimes build on, while ATEX is the legal route into the European market.
For the IS-04Z1 both routes are in progress with TÜV in Germany and neither certificate has been issued. The marking target is II 2 G Ex ib IIC T4: equipment Group II (surface industry), Category 2 (Zone 1 gas), protection concept ib (intrinsic safety), gas group IIC and temperature class T4.
In Australia. Australian sites work from an IECEx Certificate of Conformity, so an HSE or electrical reviewer would ask for that first, and ANZEx issues a national certificate from the same test reports. An ATEX certificate alongside it helps international EPCs and contractors, such as Worley or Clough, who move between Australian LNG projects and overseas assets. All of these are in progress.
The route · distribution
Distributing the IS-04Z1 in Australia
Distribution of the IS-04Z1 is by authorised partners only, and SAMS has not yet granted a territory for Australia. Each application is reviewed on its merits. Because opening a certified Ex handset in an ordinary workshop invalidates its certificate, the partner must be able to support and service the device locally.
What SAMS looks for in a partner
- Operator relationships
- Existing supplier registrations or a clear route to them with the main operators and contractors in Australia.
- Ex-competent staff
- People who understand zone classification, markings and the conditions of a certificate.
And equally important
- Local-language support
- Documentation, training and helpdesk in the languages the workforce uses.
- Service capability
- Spares, battery replacement and repair routed through SAMS-approved channels.
Questions · Australia
Frequently asked questions
Can we buy an ATEX and IECEx smartphone in Australia today?
No. Nothing can be bought or taken into a classified area today: certification is in progress and launch is planned for Q4 2026. What is available now is the datasheet, the written certification schedule and evaluation units for safe-area use.
What does an ATEX and IECEx smartphone in Australia cost?
SAMS has not published a price. Any figure you are offered for an uncertified Ex phone should be treated with caution; written indicative pricing is available for a defined quantity and site.
Is the IS-04Z1 ATEX and IECEx certified?
Not yet. Both routes are in progress with TÜV in Germany and no certificate has been issued. Any listing that says otherwise is wrong.
Which sites in Australia does this cover?
The market guide for Australia covers Karratha and the Burrup Peninsula, Onslow, Western Australia, Darwin, Gladstone and Curtis Island, among others. Site-level pages are linked below.
How do I become a SAMS distributor for Australia?
Apply through the distributor page with your company details and the territory you cover. SAMS reviews applications company by company and has not yet granted a territory for Australia.
Do assemblies of certified items need extra checks in Australia?
Often yes. An IECEx certificate for an assembly is not automatically accepted unless validated against the current AS/NZS 60079.14 or the assembly is independently inspected. Ask the site engineer or an inspection body how a packaged or modular system will be treated before shipping.
Is IECEx certification accepted in Australia?
Yes. Australia accepts a current IECEx or ANZEx Certificate of Conformity under the AS/NZS 60079 series, with the gas group and temperature class matching the classified area. ATEX-only equipment is not automatically accepted. Confirm the installation documentation expected for your site with the operator's electrical engineer.
Can the phone be used in underground coal mines?
No: underground coal equipment is Group I, regulated at state level, which is a different regime from the Group II surface certification the IS-04Z1 targets. Surface coal handling with Zone 21 dust, and gas areas at LNG and processing plants, are the intended duty. Check the classification with the mine operator and regulator.
Related guides
Keep exploring
Other guides for Australia, other places in Australia, and the pages behind them.
Rugged Mobile Phone Supplier in AustraliaSame place, different guide
Industrial Mobile Phone Supplier in AustraliaSame place, different guide
IECEx Mobile Phone Distributor in AustraliaSame place, different guide
Intrinsically Safe Mobile Phone in AustraliaSame place, different guide
Explosion-Proof Mobile Phone Supplier in AustraliaSame place, different guide
Hazardous Area Mobile Phone Distributor in AustraliaSame place, different guide
Australia market guideCertification route and regulators
All guides for AustraliaEvery route we cover
Certification statusWhat is in progress
Enquiry · Australia
Ask about the IS-04Z1 for Australia
Tell us what you need to equip and where. The SAMS team answers by email with the datasheet and where each certification route stands.
Enquiry · Australia
Launching Q4 2026
Planning for Australia?
Send the zone and gas group of your site and we will reply with the datasheet and schedule.