Brazil: rules and approvals
An OCP may issue its certificate on the basis of an IECEx test report and quality assessment report if they are equivalent, but only under Model 5, so IECEx work helps without replacing national certification.
The IS-04Z1 is an Ex mobile phone for people working inside classified areas on Brazilian platforms, refineries, petrochemical units, mills and terminals. Buyers searching for an ATEX and IECEx cell phone supplier for Brazil can take the datasheet and the certification schedule for the IS-04Z1 now; supply follows certification.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. An ATEX and IECEx cell phone for Brazil cannot be bought yet: the SAMS IS-04Z1 is pre-launch (certification in progress, no certificate issued), and the datasheet, certification schedule and safe-area evaluation units are available now.
Current position: certification in progress, nothing issued, launch targeted for Q4 2026. A buyer's engineering review is separate from the certificate. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Marking | II 2 G Ex ib IIC T4 on the rating plate | Design target; not yet marked |
| EU-type examination certificate | Notified body number and certificate ID | In progress with TÜV; not issued |
| IECEx certificate of conformity | Number listed on the IECEx online register | In progress; not issued |
| Where it applies | Brazil: Suape, Pernambuco, Camaçari, Bahia, Santos Basin pre-salt | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Brazil. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
The classified areas, operators and sites below are the ones covered in the SAMS Brazil market guide.
An OCP may issue its certificate on the basis of an IECEx test report and quality assessment report if they are equivalent, but only under Model 5, so IECEx work helps without replacing national certification.
Petrobras began processing oil shale in 1953 with its Petrosix technology, and in 2006 its industrial retort could treat 260 tonnes of shale an hour.
ANATEL's CERTIFICA platform requires the local applicant's legal representative to sign a product warranty and technical support declaration, and certification templates need ICP-Brasil digital signatures.
The pre-salt oil fields lie within Brazil's exclusive economic zone and extend along the coast from Espirito Santo to Santa Catarina, with reserves estimated at more than 50 billion barrels.
ATEX is the European legal framework for equipment used in explosive atmospheres (Directive 2014/34/EU). IECEx is the international certification scheme built on the IEC 60079 standards. Buyers outside Europe often ask for both: an IECEx certificate is the technical evidence most national regimes build on, while ATEX is the legal route into the European market.
For the IS-04Z1 both routes are in progress with TÜV in Germany and neither certificate has been issued. The marking target is II 2 G Ex ib IIC T4: equipment Group II (surface industry), Category 2 (Zone 1 gas), protection concept ib (intrinsic safety), gas group IIC and temperature class T4.
In Brazil. In Brazil a foreign certificate settles nothing alone: certification is compulsory, issued by an INMETRO-accredited OCP, and the INMETRO mark is what inspectors and Petrobras contracts look for. IECEx and ATEX evidence supports the file, particularly for international EPCs and FPSO owners such as MODEC and SBM Offshore, but does not replace it. Certification is in progress.
Nothing can be bought for Brazil today: the IS-04Z1 is pre-launch, and SAMS will supply end users through authorised distributors once certificates exist. What a buyer can do now is take the specification, ask for the written certification schedule and arrange a safe-area evaluation, so that the right local channel contacts you at launch.
The technical specification, marking target and conditions of use, sent by email.
Which certificates are in progress, in what order, and what is still to be confirmed.
Evaluation units can be used for connectivity, MDM enrolment and workflow testing outside classified areas.
Tell us the site, zone, gas group and quantity so the right authorised distributor can contact you.
Not today. Until the certificates are issued the IS-04Z1 stays out of classified areas, and until launch there is nothing to purchase. You can ask for the datasheet and the certification schedule, or book a safe-area evaluation unit.
There is no list price yet. SAMS gives indicative pre-launch pricing in writing, against a stated quantity and site, and does not commit to a lead time before certification completes.
Not yet. Both routes are in progress with TÜV in Germany and no certificate has been issued. Any listing that says otherwise is wrong.
The market guide for Brazil covers Santos Basin pre-salt, Campos Basin, Duque de Caxias, Paulínia, among others. Site-level pages are linked below.
Through authorised distributors once certificates exist. Until then SAMS can send the datasheet and certification schedule and arrange safe-area evaluation units.
Typically offshore pre-salt platforms and floating units off the south-east coast, onshore refineries and terminals, petrochemical complexes and ethanol and sugar mills. Each operator issues its own area classification, so request the zone drawing, gas or dust group and temperature class before choosing equipment.
Radio equipment needs ANATEL certification through the CERTIFICA platform, using a local legal representative who signs the warranty and technical support declaration, with digital signatures from ICP-Brasil on templates. Requirements change, so confirm current steps with ANATEL or an accredited certification body.
No: certification is compulsory and issued by an OCP accredited by INMETRO, under Portaria INMETRO 115 of 2022. IECEx data normally supports the Brazilian file without replacing it. The IS-04Z1 has no certificate of any kind yet. Check requirements with Petrobras or your contract's equipment specification.
More on Brazil, and on other places in Brazil.
Share the site details and quantity. You will get the datasheet and the certification schedule back by email; pricing is indicative only until launch.
Tell us the zone, gas group and operator. We will send the datasheet and the certification schedule.