The IS-04Z1 is an intrinsically safe Android handset designed for Zone 1 and Zone 21, aimed at the chemical belt along the Scheldt, the terminals at Zeebrugge and the platforms in Hainaut. This page explains what to look for in an ATEX and IECEx cell phone for Belgium, and where the IS-04Z1 stands against that list today.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. The SAMS IS-04Z1 is the intrinsically safe smartphone covered here for Belgium: pre-launch, designed for Zone 1 and Zone 21 (marking target Ex ib IIC T4), with certification in progress and no certificate issued.
Where things stand: the IS-04Z1 has not launched, and none of its four certification routes has produced a certificate yet. An operator's own vendor approval is a separate step. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Marking | II 2 G Ex ib IIC T4 on the rating plate | Design target; not yet marked |
| EU-type examination certificate | Notified body number and certificate ID | In progress with TÜV; not issued |
| IECEx certificate of conformity | Number listed on the IECEx online register | In progress; not issued |
| Where it applies | Belgium: Antwerp right bank, Antwerp left bank, Zeebrugge | Classified by the site operator |
An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Belgium. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
The classified areas, operators and sites below are the ones covered in the SAMS Belgium market guide.
Chemicals, pharmaceuticals, petroleum products, metals and motor vehicle assembly feature among Belgium's industrial base, and chemicals are also a leading export, which means many process plants with flammable solvents and gases.
Fluxys is the main natural gas transmission operator, and gas imports came mainly from the Netherlands and Norway in 2021, so compressor and metering stations are part of the classified-area network.
Dutch-speaking Flanders and French-speaking Wallonia have different industrial histories and languages, and Belgium has a multilingual, well-trained workforce, so Dutch and French documents are often requested.
Industry is concentrated in Flanders in the north, around Brussels, and along the Sillon industriel through Liège and Charleroi, so hazardous-area work is split between a coastal north and an older steel and chemicals south.
ATEX is the European legal framework for equipment used in explosive atmospheres (Directive 2014/34/EU). IECEx is the international certification scheme built on the IEC 60079 standards. Buyers outside Europe often ask for both: an IECEx certificate is the technical evidence most national regimes build on, while ATEX is the legal route into the European market.
For the IS-04Z1 both routes are in progress with TÜV in Germany and neither certificate has been issued. The marking target is II 2 G Ex ib IIC T4: equipment Group II (surface industry), Category 2 (Zone 1 gas), protection concept ib (intrinsic safety), gas group IIC and temperature class T4.
In Belgium. ATEX is the whole product-side requirement in Belgium, so a reviewer inside the Antwerp cluster would ask for a notified body certificate, CE marking and the EU declaration of conformity. An IECEx route alongside helps groups such as BASF, TotalEnergies and ExxonMobil that also run non-EU plants. Instructions must reach workers in the regional language. Certification is in progress.
A short checklist for anyone writing or reviewing the specification, with the IS-04Z1 status against each point.
Not yet. The IS-04Z1 is pre-launch and its certification is still in progress ahead of a Q4 2026 launch. No unit goes into a classified area before the certificate covering it exists. The datasheet, the certification schedule and safe-area evaluation units are available now.
There is no list price yet. SAMS gives indicative pre-launch pricing in writing, against a stated quantity and site, and does not commit to a lead time before certification completes.
Not yet. Both routes are in progress with TÜV in Germany and no certificate has been issued. Any listing that says otherwise is wrong.
The market guide for Belgium covers Antwerp right bank, Antwerp left bank, Zeebrugge, Ghent canal zone, among others. Site-level pages are linked below.
Not exactly. Explosion proof is a broad everyday term; intrinsic safety is one protection concept, which limits energy so ignition cannot occur. Flameproof (Ex d) is a different concept that contains an explosion. The IS-04Z1 is intrinsically safe by design.
Belgium is an EU member, so ATEX Directive 2014/34/EU applies to equipment placed on its market, and employers zone workplaces under Directive 1999/92/EC. Zone 1 and Zone 2 devices should carry the Ex and CE markings. Confirm the exact accepted categories with each site operator.
Dutch in Flanders, French in Wallonia and sometimes English at international chemical sites. Instructions are typically expected in the user's language for ATEX equipment, so ask the operator which language it expects. Bilingual documentation packs can avoid delays at gate control.
Camera control is why ordinary phones are refused at the gate on Seveso sites. Android 16 with EMM and MDM lets the camera, location services and application list be set centrally, so permissions can be shown during evaluation. Whether a site accepts it still depends on its own rules. Confirm with the operator before taking a unit in.
Other guides for Belgium, other places in Belgium, and the pages behind them.
Tell us what you need to equip and where. The SAMS team answers by email with the datasheet and where each certification route stands.
Name the site and the operator and we will send what is available before launch.
