France: rules and approvals
ATEX has two equipment groups, Group I for mining and Group II for surface industries, and CE plus Ex marking lets compliant equipment be sold anywhere in the EU, including France.
The IS-04Z1 is an intrinsically safe Android handset designed for Zone 1 and Zone 21, aimed at the refineries, chemical platforms and LNG terminals that make up the French Seveso estate. Fos-sur-Mer lies about 50 km north-west of Marseille on the Mediterranean coast, west of the Etang de Berre, and hosts a major port development run by the Autonomous Port of Marseille. Distribution partners for France are being identified ahead of the Q4 2026 launch of the IS-04Z1.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. France has no appointed SAMS distributor yet: the IS-04Z1 is pre-launch (certification in progress, no certificate issued, launch planned for Q4 2026), and distributor applications are open.
For the record, no certificate exists for the IS-04Z1 today. The programme is under way ahead of a Q4 2026 launch. A buyer's engineering review is separate from the certificate. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Marking | II 2 G Ex ib IIC T4 on the rating plate | Design target; not yet marked |
| EU-type examination certificate | Notified body number and certificate ID | In progress with TÜV; not issued |
| IECEx certificate of conformity | Number listed on the IECEx online register | In progress; not issued |
| Where it applies | France: Donges, Montoir-de-Bretagne, Feyzin and the Vallée de la Chimie | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in France. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
The main operators, industrial areas and sites that the SAMS France market guide covers.
ATEX has two equipment groups, Group I for mining and Group II for surface industries, and CE plus Ex marking lets compliant equipment be sold anywhere in the EU, including France.
Fos-sur-Mer's port includes container terminals and a methane terminal, and its waterside industrial zone attracts steel, chemical and oil industry sites, making it a typical mixed-hazard industrial coast.
In 2022 France announced plans to build six new reactors, reversing a 2014 plan to reduce nuclear supply, which points to long-running construction and maintenance work.
Nuclear power produces around 70% of France's electricity from 56 active reactors in 2023, so large plant outages bring many contractors to a small number of sites.
ATEX is the European legal framework for equipment used in explosive atmospheres (Directive 2014/34/EU). IECEx is the international certification scheme built on the IEC 60079 standards. Buyers outside Europe often ask for both: an IECEx certificate is the technical evidence most national regimes build on, while ATEX is the legal route into the European market.
For the IS-04Z1 both routes are in progress with TÜV in Germany and neither certificate has been issued. The marking target is II 2 G Ex ib IIC T4: equipment Group II (surface industry), Category 2 (Zone 1 gas), protection concept ib (intrinsic safety), gas group IIC and temperature class T4.
In France. A French reviewer on a Seveso plateforme would expect ATEX evidence tied to the declared zones, along with the documentation the site requires under its authorisation. IECEx papers help international EPCs and contractors who work on French platforms and elsewhere. A dual route could let one pack serve both. Certification is in progress; no certificate exists yet.
A distributor for France would carry the IS-04Z1 after certification completes; the Q4 2026 launch is the planning date and no appointment has been made. SAMS reviews applicants one by one and prefers companies with their own Ex-competent technical and service staff, since certified devices must not be repaired outside approved channels.
No. Nothing can be bought or taken into a classified area today: certification is in progress and launch is planned for Q4 2026. What is available now is the datasheet, the written certification schedule and evaluation units for safe-area use.
No price is published. While certification is in progress there is no list price and no committed lead time, and a supplier quoting a firm figure for an uncertified Ex handset is promising something it cannot stand behind. Indicative pre-launch pricing is issued in writing against a stated quantity and site.
Not yet. Both routes are in progress with TÜV in Germany and no certificate has been issued. Any listing that says otherwise is wrong.
The market guide for France covers Gonfreville-l'Orcher, Port-Jérôme, Donges, Montoir-de-Bretagne, among others. Site-level pages are linked below.
Apply through the distributor page with your company details and the territory you cover. SAMS reviews applications company by company and has not yet granted a territory for France.
French is generally expected for instructions and safety documentation at French sites, and ATEX user instructions are typically required in the language of the destination country. International operators may also accept English. Ask the site contact which language they require for contractor equipment files.
Large reactor outages bring many contractors at once, so site access, induction and equipment registration can be tightly scheduled. Nuclear sites also have conventional hazardous areas, for example for hydrogen and fuel stores, so agree device approval early with the plant's safety office.
Zones and rules are set by the site operator and can differ between units on the same platform. A device would need a marking suitable for each zone it enters. Check the zone plan and permit rules with the platform operator before carrying a handset in.
More on France, and on other places in France.
Share the site details and quantity. You will get the datasheet and the certification schedule back by email; pricing is indicative only until launch.
Tell us the zone, gas group and operator. We will send the datasheet and the certification schedule.