Brazil: rules and approvals
Certification is carried out by an INMETRO-accredited product certification body, called an OCP, and Model 5 certificates, which include a quality system audit and surveillance, are valid for six years.
The IS-04Z1 is an Ex mobile phone for people working inside classified areas on Brazilian platforms, refineries, petrochemical units, mills and terminals. Portaria INMETRO No. 115 of 21 March 2022 sets the conformity assessment rules for electrical equipment in explosive atmospheres, and it replaced Portaria No. 179/2010 from 1 April 2022. Distribution partners for Brazil are being identified ahead of the Q4 2026 launch of the IS-04Z1.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. Brazil has no appointed SAMS distributor yet: the IS-04Z1 is pre-launch (certification in progress, no certificate issued, launch planned for Q4 2026), and distributor applications are open.
Current position: certification in progress, nothing issued, launch targeted for Q4 2026. An operator's own vendor approval is a separate step. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Marking | II 2 G Ex ib IIC T4 on the rating plate | Design target; not yet marked |
| EU-type examination certificate | Notified body number and certificate ID | In progress with TÜV; not issued |
| IECEx certificate of conformity | Number listed on the IECEx online register | In progress; not issued |
| Where it applies | Brazil: Duque de Caxias, Paulínia, Suape, Pernambuco | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Brazil. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
Operators and classified areas drawn from the SAMS Brazil market guide.
Certification is carried out by an INMETRO-accredited product certification body, called an OCP, and Model 5 certificates, which include a quality system audit and surveillance, are valid for six years.
Petrobras was created in 1953 under the slogan The Oil Is Ours, was given a legal monopoly, and is headquartered in Rio de Janeiro; its REDUC refinery began operating in 1961.
ANATEL's warranty declaration rule rests on Resolution 715/2019, Act 3939/2021 and the Consumer Protection Code, so the local representative takes on legal responsibility for after-sales support.
An OCP may issue its certificate on the basis of an IECEx test report and quality assessment report if they are equivalent, but only under Model 5, so IECEx work helps without replacing national certification.
ATEX is the European legal framework for equipment used in explosive atmospheres (Directive 2014/34/EU). IECEx is the international certification scheme built on the IEC 60079 standards. Buyers outside Europe often ask for both: an IECEx certificate is the technical evidence most national regimes build on, while ATEX is the legal route into the European market.
For the IS-04Z1 both routes are in progress with TÜV in Germany and neither certificate has been issued. The marking target is II 2 G Ex ib IIC T4: equipment Group II (surface industry), Category 2 (Zone 1 gas), protection concept ib (intrinsic safety), gas group IIC and temperature class T4.
In Brazil. In Brazil a foreign certificate settles nothing alone: certification is compulsory, issued by an INMETRO-accredited OCP, and the INMETRO mark is what inspectors and Petrobras contracts look for. IECEx and ATEX evidence supports the file, particularly for international EPCs and FPSO owners such as MODEC and SBM Offshore, but does not replace it. Certification is in progress.
Distribution of the IS-04Z1 is by authorised partners only, and SAMS has not yet granted a territory for Brazil. Each application is reviewed on its merits. Because opening a certified Ex handset in an ordinary workshop invalidates its certificate, the partner must be able to support and service the device locally.
No. Nothing can be bought or taken into a classified area today: certification is in progress and launch is planned for Q4 2026. What is available now is the datasheet, the written certification schedule and evaluation units for safe-area use.
There is no list price yet. SAMS gives indicative pre-launch pricing in writing, against a stated quantity and site, and does not commit to a lead time before certification completes.
Not yet. Both routes are in progress with TÜV in Germany and no certificate has been issued. Any listing that says otherwise is wrong.
The market guide for Brazil covers Santos Basin pre-salt, Campos Basin, Duque de Caxias, Paulínia, among others. Site-level pages are linked below.
Apply through the distributor page with your company details and the territory you cover. SAMS reviews applications company by company and has not yet granted a territory for Brazil.
Under Portaria 115/2022 the manufacturer or the importer can apply to an INMETRO-accredited certification body, and the certificate carries the INMETRO seal. Who holds the certificate and how the factory is audited depend on the model chosen, so confirm the details with an OCP.
Not directly. INMETRO requires certification by an accredited OCP under Portaria 115/2022, although an OCP may base its certificate on an IECEx test report and quality report under Model 5. ATEX and IECEx certificates alone do not give market access, so confirm the route with a Brazilian OCP.
Android 16 runs the interface in Brazilian Portuguese, and Portuguese documentation is part of the launch package. That matters for training records under NR-20 and NR-10, which auditors expect in the working language. Certification is still in progress, so documentation is not yet final. Ask the supplier for sample pages.
Related guides for Brazil and for Brazil.
Tell us what you need to equip and where. The SAMS team answers by email with the datasheet and where each certification route stands.
Name the site and the operator and we will send what is available before launch.