Australia: rules and approvals
Australia works on the IECEx scheme and the AS/NZS 60079 series, and the national ANZEx scheme is harmonised with IECEx, so IECEx-certified equipment can be used almost without separate national testing.
A Zone 1 / Zone 21 smartphone for crews on Australian LNG trains, offshore facilities, processing plants and remote mine sites. The Pilbara covers 507,896 square kilometres in the north of Western Australia, a large, dry, sparsely populated region known for iron ore, with four local government areas. Distribution partners for Australia are being identified ahead of the Q4 2026 launch of the IS-04Z1.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. Australia has no appointed SAMS distributor yet: the IS-04Z1 is pre-launch (certification in progress, no certificate issued, launch planned for Q4 2026), and distributor applications are open.
Current position: certification in progress, nothing issued, launch targeted for Q4 2026. Operator approval runs on its own timeline. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Ingress protection | IP65 to IP68 sealing | IP68 design |
| Drop and shock | A stated drop height onto concrete | Specification on request |
| Explosion protection | A separate certificate and marking | In progress; not issued |
| Where it applies | Australia: Darwin, Gladstone and Curtis Island, Bowen Basin, Queensland | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Australia. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
The main operators, industrial areas and sites that the SAMS Australia market guide covers.
Australia works on the IECEx scheme and the AS/NZS 60079 series, and the national ANZEx scheme is harmonised with IECEx, so IECEx-certified equipment can be used almost without separate national testing.
The Australian Communications and Media Authority regulates the supply of radiocommunications equipment and made rule changes in 2023 to simplify and streamline that regulation.
An ATEX marking alone is not automatically accepted, because ATEX is an EU directive that allows self-declaration for some categories, and such equipment usually needs a conformity assessment.
The Pilbara has more than 45,000 residents, most living in the western third in towns such as Port Hedland, Karratha and Wickham, while the eastern third is almost entirely desert.
A rugged phone is built to survive water, dust, drops and rough handling, usually rated by an IP code and a drop specification. Ruggedness is an environmental property: it says nothing about whether a phone may be used where flammable gas or dust is present. That is decided by explosion-protection certification and marking.
The IS-04Z1 combines both: an IP68 sealed rugged build and a design for Zone 1 and Zone 21 (marking target Ex ib IIC T4). The explosion-protection certificates are in progress and none has been issued.
In Australia. Pilbara summers push site ambients past 45 degrees, and a haul-road vehicle adds drop, shock and vibration. IP68 sealing and a rugged build are designed for gloved use and that duty. Neither IP68 nor ruggedness gives explosion protection, and underground coal is a different regime, Group I, from the Group II surface certification targeted here.
A distributor for Australia would carry the IS-04Z1 after certification completes; the Q4 2026 launch is the planning date and no appointment has been made. SAMS reviews applicants one by one and prefers companies with their own Ex-competent technical and service staff, since certified devices must not be repaired outside approved channels.
Not today. Until the certificates are issued the IS-04Z1 stays out of classified areas, and until launch there is nothing to purchase. You can ask for the datasheet and the certification schedule, or book a safe-area evaluation unit.
There is no list price yet. SAMS gives indicative pre-launch pricing in writing, against a stated quantity and site, and does not commit to a lead time before certification completes.
It is designed to IP68 sealing, with glove-friendly controls. Ruggedness is not explosion protection: that depends on the certificates, which are in progress.
The market guide for Australia covers Karratha and the Burrup Peninsula, Onslow, Western Australia, Darwin, Gladstone and Curtis Island, among others. Site-level pages are linked below.
Apply through the distributor page with your company details and the territory you cover. SAMS reviews applications company by company and has not yet granted a territory for Australia.
The Pilbara is hot, dry and dusty, with long distances between sites and towns. Check the operating temperature range, dust ingress rating and battery life in heat, and confirm with the operator any site rules on permits, inductions and mobile devices in classified areas.
It is the installation documentation expected under AS/NZS 60079.14, showing that the equipment, its certificate and its installation suit the classified area. Operators and inspectors look for it before energising equipment, so ask the site electrical team what must be supplied with portable and fixed equipment.
The target marking is T4 with the ambient range to be fixed on the certificate, which is not yet issued. The 4,000 mAh battery is sized for a roster day with radio, camera and GNSS running. Check the certified range against your site's worst summer ambient and trial a unit before fleet orders.
Related guides for Australia and for Australia.
Share the site details and quantity. You will get the datasheet and the certification schedule back by email; pricing is indicative only until launch.
Send the zone and gas group of your site and we will reply with the datasheet and schedule.