United Kingdom: industry on the ground
UK crude oil and condensate production had fallen to about 630,000 barrels a day by 2024, so much of the current work is maintenance, life extension and decommissioning of mature installations.
The IS-04Z1 is an intrinsically safe Android smartphone designed for Zone 1 and Zone 21 work, from a North Sea deck to a gas governor kiosk at the end of a street. If you are specifying an intrinsically safe smartphone for United Kingdom, this page covers the markings, the approvals and the current certification status of the IS-04Z1.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. The SAMS IS-04Z1 is the intrinsically safe smartphone covered here for United Kingdom: pre-launch, designed for Zone 1 and Zone 21 (marking target Ex ib IIC T4), with certification in progress and no certificate issued.
Where things stand: the IS-04Z1 has not launched, and none of its four certification routes has produced a certificate yet. A buyer's engineering review is separate from the certificate. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Level of protection | ia, ib or ic matched to the zone | ib, for Zone 1 |
| Entity parameters | Uo, Io and Po within the device limits | Published with the certificate |
| Accessories | Chargers and cases certified with the device | Defined at certification |
| Where it applies | United Kingdom: Aberdeen, St Fergus, Sullom Voe | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in United Kingdom. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
The classified areas, operators and sites below are the ones covered in the SAMS United Kingdom market guide.
UK crude oil and condensate production had fallen to about 630,000 barrels a day by 2024, so much of the current work is maintenance, life extension and decommissioning of mature installations.
About 98 per cent of UK oil and gas production comes from offshore fields, and the services industry in Aberdeen has been a leader in offshore technology.
The Dangerous Substances and Explosive Atmospheres Regulations 2002 require employers to identify and classify areas where explosive atmospheres may occur and to avoid ignition sources from unprotected equipment in them.
Since 1 October 2024 CE marking has been recognised in Great Britain without an end date, so ATEX-certified products can be sold there without UKCA, while Northern Ireland still requires CE.
Intrinsic safety limits the electrical and thermal energy in a circuit so that neither a spark nor a hot surface can ignite a gas or dust atmosphere, even when a fault occurs. The ib level, used for Zone 1, tolerates one fault. It is the usual way to make a handheld device that a worker carries continuously through a hazardous area.
The IS-04Z1 is designed on this principle for Zone 1 and Zone 21 (marking target II 2 G Ex ib IIC T4). Intrinsic safety is a design basis, not a certificate: certification is in progress and none has been issued yet.
In United Kingdom. Intrinsic safety suits the long shifts on a platform or terminal and the lone-worker visits to rural gas sites. A handheld that limits ignition energy lets a worker take photographs sharp enough for permit or inspection evidence, avoiding a second trip into the zone, and keep a position and connection.
A short checklist for anyone writing or reviewing the specification, with the IS-04Z1 status against each point.
No. Nothing can be bought or taken into a classified area today: certification is in progress and launch is planned for Q4 2026. What is available now is the datasheet, the written certification schedule and evaluation units for safe-area use.
There is no list price yet. SAMS gives indicative pre-launch pricing in writing, against a stated quantity and site, and does not commit to a lead time before certification completes.
The circuits are designed to limit energy so a spark or hot surface cannot ignite a gas or dust atmosphere, even with one fault (level ib, Zone 1). Certification of that design is in progress.
The market guide for United Kingdom covers Aberdeen, St Fergus, Sullom Voe, Grangemouth, among others. Site-level pages are linked below.
Not exactly. Explosion proof is a broad everyday term; intrinsic safety is one protection concept, which limits energy so ignition cannot occur. Flameproof (Ex d) is a different concept that contains an explosion. The IS-04Z1 is intrinsically safe by design.
DSEAR places duties on employers to classify areas where explosive atmospheres may occur and to avoid ignition sources from unprotected equipment. A site will therefore expect devices used in classified areas to be suitable for the zone, gas group and temperature class stated in its area classification records.
Yes. Since 1 October 2024 CE marking has been recognised in Great Britain without an end date, so an ATEX-certified product can be sold there without UKCA, although a UKCA route with a UK approved body also exists. Northern Ireland still requires CE. Check the current rules before shipping.
It combines 4G LTE, Wi-Fi and four-constellation GNSS to hold a position and a connection where one network is not enough. Actual coverage depends on the site, so test the unit on your own route before relying on it.
Related guides for United Kingdom and for United Kingdom.
Send the site, zone and gas group and roughly how many handsets. We reply by email with the datasheet and the certification schedule.
Tell us the zone, gas group and operator. We will send the datasheet and the certification schedule.