Australia: rules and approvals
An IECEx certificate for an assembly of several items is not automatically accepted unless it is validated against the current AS/NZS 60079.14 or the assembly is independently inspected.
Australia · intrinsically safe
Intrinsically Safe Smartphone in Australia
A Zone 1 / Zone 21 smartphone for crews on Australian LNG trains, offshore facilities, processing plants and remote mine sites. If you are specifying an intrinsically safe smartphone for Australia, this page covers the markings, the approvals and the current certification status of the IS-04Z1.
Pre-launch · certification in progress · Launching Q4 2026
Marking targetEx ib IIC T4Intrinsic safety, Zone 1 / 21 design target · certification in progress
AvailabilityQ4 2026via authorised distributors
Search topicintrinsically safe
DeviceSmartphone
RouteSpecification
WhereAustralia
Short answer. The SAMS IS-04Z1 is the intrinsically safe smartphone covered here for Australia: pre-launch, designed for Zone 1 and Zone 21 (marking target Ex ib IIC T4), with certification in progress and no certificate issued.
Status: pre-launch. IECEx, ATEX, UKEX and NEC 500 certification is in progress and no certificate has been issued; launch is planned for Q4 2026. An operator's own vendor approval is a separate step. Certification status. Place facts reviewed October 2026.
At a glance · intrinsically safe
Checklist: intrinsically safe smartphone for Australia
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Level of protection | ia, ib or ic matched to the zone | ib, for Zone 1 |
| Entity parameters | Uo, Io and Po within the device limits | Published with the certificate |
| Accessories | Chargers and cases certified with the device | Defined at certification |
| Where it applies | Australia: Karratha and the Burrup Peninsula, Onslow, Western Australia, Darwin | Classified by the site operator |
Product · Australia
The product behind this search: the SAMS IS-04Z1.
SAMS IS-04Z1
An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Australia. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
- IP68 sealed
- 4,000 mAh battery
- 50 MP camera
- Android 16
- Zone 1 / Zone 21 design target
The market · Australia
Where this applies in Australia
The classified areas, operators and sites below are the ones covered in the SAMS Australia market guide.
Operators, EPCs and contractors
- Woodside Energy
- North West Shelf, Pluto LNG and the Karratha Gas Plant
- Chevron Australia
- Gorgon on Barrow Island and Wheatstone at Onslow
- INPEX
- Ichthys LNG at Darwin and Browse Basin facilities
- Shell Australia
- Prelude FLNG and QCLNG on Curtis Island
- Santos
- GLNG at Gladstone and the Moomba gas plant
- ConocoPhillips and Origin Energy
- Australia Pacific LNG and Surat Basin coal seam gas
Industrial areas and sites
- Karratha and the Burrup Peninsula
- Karratha Gas Plant, Pluto LNG and offshore support
- Onslow, Western Australia
- Wheatstone LNG and the Ashburton North estate
- Darwin
- Ichthys LNG, marine supply base and harbour work
- Gladstone and Curtis Island
- Three LNG trains plus alumina and coal wharves
- Bowen Basin, Queensland
- Coal mining, methane drainage and handling plants
- Pilbara, Western Australia
- Iron ore mines, workshops and bulk fuel handling
Field notes · Australia
More about Australia that matters for portable equipment
Australia: rules and approvals
Australia works on the IECEx scheme and the AS/NZS 60079 series, and the national ANZEx scheme is harmonised with IECEx, so IECEx-certified equipment can be used almost without separate national testing.
Australia: rules and approvals
The Australian Communications and Media Authority regulates the supply of radiocommunications equipment and made rule changes in 2023 to simplify and streamline that regulation.
Australia: rules and approvals
An ATEX marking alone is not automatically accepted, because ATEX is an EU directive that allows self-declaration for some categories, and such equipment usually needs a conformity assessment.
The term · intrinsically safe
What “intrinsically safe” means for a smartphone
Intrinsic safety limits the electrical and thermal energy in a circuit so that neither a spark nor a hot surface can ignite a gas or dust atmosphere, even when a fault occurs. The ib level, used for Zone 1, tolerates one fault. It is the usual way to make a handheld device that a worker carries continuously through a hazardous area.
The IS-04Z1 is designed on this principle for Zone 1 and Zone 21 (marking target II 2 G Ex ib IIC T4). Intrinsic safety is a design basis, not a certificate: certification is in progress and none has been issued yet.
In Australia. Rounds at Pluto, Gorgon, Wheatstone, Ichthys or Moomba cover large plants where a replacement handset may be a flight away. An intrinsically safe handheld is designed to be carried straight into classified areas with a 4,000 mAh battery sized for a roster day of up to twelve hours, so inspections need not stop for a charge.
The route · specification
Specifying an intrinsically safe smartphone for Australia
A short checklist for anyone writing or reviewing the specification, with the IS-04Z1 status against each point.
Check on the paper
- Marking
- Equipment group, category, protection concept, gas group and temperature class, matched to the area drawing.
- Certificate and schedule
- A certificate number, issuing body and the schedule of conditions, not a brochure claim.
- Standards edition
- The IEC 60079 or national standard edition the certificate was issued against.
Check for the IS-04Z1
- Marking target
- II 2 G Ex ib IIC T4: a target, not yet a certificate.
- Certificate status
- IECEx, ATEX, UKEX and NEC 500 in progress; none issued.
- Operator approval
- Separate from the certificate and handled with the site operator.
Questions · Australia
Frequently asked questions
Can we buy an intrinsically safe smartphone in Australia today?
No. Nothing can be bought or taken into a classified area today: certification is in progress and launch is planned for Q4 2026. What is available now is the datasheet, the written certification schedule and evaluation units for safe-area use.
What does an intrinsically safe smartphone in Australia cost?
No price is published. While certification is in progress there is no list price and no committed lead time, and a supplier quoting a firm figure for an uncertified Ex handset is promising something it cannot stand behind. Indicative pre-launch pricing is issued in writing against a stated quantity and site.
What does ‘intrinsically safe’ mean for the IS-04Z1?
The circuits are designed to limit energy so a spark or hot surface cannot ignite a gas or dust atmosphere, even with one fault (level ib, Zone 1). Certification of that design is in progress.
Which sites in Australia does this cover?
The market guide for Australia covers Karratha and the Burrup Peninsula, Onslow, Western Australia, Darwin, Gladstone and Curtis Island, among others. Site-level pages are linked below.
Is intrinsically safe the same as explosion proof?
Not exactly. Explosion proof is a broad everyday term; intrinsic safety is one protection concept, which limits energy so ignition cannot occur. Flameproof (Ex d) is a different concept that contains an explosion. The IS-04Z1 is intrinsically safe by design.
Do assemblies of certified items need extra checks in Australia?
Often yes. An IECEx certificate for an assembly is not automatically accepted unless validated against the current AS/NZS 60079.14 or the assembly is independently inspected. Ask the site engineer or an inspection body how a packaged or modular system will be treated before shipping.
Is IECEx certification accepted in Australia?
Yes. Australia accepts a current IECEx or ANZEx Certificate of Conformity under the AS/NZS 60079 series, with the gas group and temperature class matching the classified area. ATEX-only equipment is not automatically accepted. Confirm the installation documentation expected for your site with the operator's electrical engineer.
Can the phone be used in underground coal mines?
No: underground coal equipment is Group I, regulated at state level, which is a different regime from the Group II surface certification the IS-04Z1 targets. Surface coal handling with Zone 21 dust, and gas areas at LNG and processing plants, are the intended duty. Check the classification with the mine operator and regulator.
Related guides
Keep exploring
Other guides for Australia, other places in Australia, and the pages behind them.
Rugged Mobile Phone Supplier in AustraliaSame place, different guide
Hazardous Area Mobile Phone Supplier in AustraliaSame place, different guide
IECEx Mobile Phone in AustraliaSame place, different guide
Ex-Proof Mobile Phone Supplier in AustraliaSame place, different guide
Industrial Mobile Phone Supplier in AustraliaSame place, different guide
Explosion-Proof Mobile Phone Distributor in AustraliaSame place, different guide
Australia market guideCertification route and regulators
All guides for AustraliaEvery route we cover
Certification statusWhat is in progress
Enquiry · Australia
Ask about the IS-04Z1 for Australia
Send the site, zone and gas group and roughly how many handsets. We reply by email with the datasheet and the certification schedule.
Enquiry · Australia
Launching Q4 2026
Planning for Australia?
Tell us the zone, gas group and operator. We will send the datasheet and the certification schedule.