Skip to content
Certification In Progress · Launching Q4 2026 Become a Distributor
Certification In Progress · Launching Q4 2026 Product Certifications Industries Blog About Contact Become a Distributor
US Shale Oil Operations · intrinsically safe

Intrinsically Safe Mobile Phone in US Shale Oil Operations

US shale oil comes mainly from the Permian Basin in Texas and New Mexico and the Bakken in North Dakota. Zone 1 work arises at drilling rigs, wellsites, tank batteries, compressor stations and gas gathering. If you are specifying an intrinsically safe mobile phone for US shale oil operations, this page covers the markings, the approvals and the current certification status of the IS-04Z1.

Pre-launch · certification in progress · Launching Q4 2026

SAMS IS-04Z1 intrinsically safe smartphone for US Shale Oil Operations, front view
Marking targetEx ib IIC T4Intrinsic safety, Zone 1 / 21 design target · certification in progress
AvailabilityQ4 2026via authorised distributors
Search topicintrinsically safe
DeviceMobile Phone
RouteSpecification
WhereUS Shale Oil Operations

Short answer. The SAMS IS-04Z1 is the intrinsically safe smartphone covered here for US shale oil operations: pre-launch, designed for Zone 1 and Zone 21 (marking target Ex ib IIC T4), with certification in progress and no certificate issued.

Current position: certification in progress, nothing issued, launch targeted for Q4 2026. Operator approval runs on its own timeline. Certification status. Place facts reviewed October 2026.

At a glance · intrinsically safe

Checklist: intrinsically safe mobile phone for US shale oil operations

Specification checklist against the IS-04Z1 today
CheckWhat to look forIS-04Z1 today
Level of protectionia, ib or ic matched to the zoneib, for Zone 1
Entity parametersUo, Io and Po within the device limitsPublished with the certificate
AccessoriesChargers and cases certified with the deviceDefined at certification
Where it appliesUS shale oil operations: Drilling rigs, Wellsites and tank batteries, Compressor stationsClassified by the site operator
Product · US Shale Oil Operations

The product behind this search: the SAMS IS-04Z1.

SAMS IS-04Z1 explosion proof mobile phone, front view

SAMS IS-04Z1

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in US Shale Oil Operations. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.

  • IP68 sealed
  • 4,000 mAh battery
  • 50 MP camera
  • Android 16
  • Zone 1 / Zone 21 design target
The site · US shale oil operations

Working in US shale oil operations: operators and classified areas

The companies on site and the hazardous-area types a handset is likely to meet there.

Operators and companies on site

  • Chord Energy
  • Continental Resources
  • Chevron
  • Diamondback Energy

Classified areas to expect

  • Drilling rigs
  • Wellsites and tank batteries
  • Compressor stations
  • Gas gathering and processing
Local conditions · US shale oil operations

Site conditions at US shale oil operations: what wears and what limits equipment

Permian

The Permian is the highest-producing US oil field, at 4.2 million barrels a day in 2019, with Midland-based Diamondback among its operators.

Bakken

Bakken output rose through horizontal drilling and hydraulic fracturing, with North Dakota and Montana passing 1 million barrels a day in April 2014.

Field notes · US shale oil operations

More about US shale oil operations that matters for portable equipment

US shale oil operations: people and language

About two thirds of the world's active drilling rigs are in the United States and Canada, and many independent operators and contractors have shale expertise, so crews and service firms are plentiful.

US shale oil operations: geography and layout

Tight oil formations in the United States include the Bakken, Niobrara, Barnett and Eagle Ford shales, spread across several states and climates.

US shale oil operations: infrastructure

Tight reservoirs typically need roughly 15 to 20 percent natural gas in the pore space to drive the oil, so oil wells commonly come with associated gas to handle.

US shale oil operations: projects and investment

Tight oil is light crude held in low-permeability formations and is produced with hydraulic fracturing and horizontal wells; at least 4,000 new shale wells came online in 2012 alone.

The term · intrinsically safe

What “intrinsically safe” means for a smartphone

Intrinsic safety limits the electrical and thermal energy in a circuit so that neither a spark nor a hot surface can ignite a gas or dust atmosphere, even when a fault occurs. The ib level, used for Zone 1, tolerates one fault. It is the usual way to make a handheld device that a worker carries continuously through a hazardous area.

The IS-04Z1 is designed on this principle for Zone 1 and Zone 21 (marking target II 2 G Ex ib IIC T4). Intrinsic safety is a design basis, not a certificate: certification is in progress and none has been issued yet.

In US shale oil operations. Shale field crews visit many wellsites and tank batteries, in both hot West Texas and cold North Dakota conditions. An intrinsically safe handheld is designed to be carried into Zone 1 areas for gauging records and photographs. Battery behaviour across that temperature spread should be evaluated, and certification must come first.

The route · specification

Specifying an intrinsically safe mobile phone for US Shale Oil Operations

A short checklist for anyone writing or reviewing the specification, with the IS-04Z1 status against each point.

Check on the paper

Marking
Equipment group, category, protection concept, gas group and temperature class, matched to the area drawing.
Certificate and schedule
A certificate number, issuing body and the schedule of conditions, not a brochure claim.
Standards edition
The IEC 60079 or national standard edition the certificate was issued against.

Check for the IS-04Z1

Marking target
II 2 G Ex ib IIC T4: a target, not yet a certificate.
Certificate status
IECEx, ATEX, UKEX and NEC 500 in progress; none issued.
Operator approval
Separate from the certificate and handled with the site operator.
Questions · US Shale Oil Operations

Frequently asked questions

Can we buy an intrinsically safe mobile phone in US Shale Oil Operations today?

No. Nothing can be bought or taken into a classified area today: certification is in progress and launch is planned for Q4 2026. What is available now is the datasheet, the written certification schedule and evaluation units for safe-area use.

What does an intrinsically safe mobile phone in US Shale Oil Operations cost?

No price is published. While certification is in progress there is no list price and no committed lead time, and a supplier quoting a firm figure for an uncertified Ex handset is promising something it cannot stand behind. Indicative pre-launch pricing is issued in writing against a stated quantity and site.

What does ‘intrinsically safe’ mean for the IS-04Z1?

The circuits are designed to limit energy so a spark or hot surface cannot ignite a gas or dust atmosphere, even with one fault (level ib, Zone 1). Certification of that design is in progress.

Which areas at US shale oil operations would use it?

Likely candidates are drilling rigs, wellsites and tank batteries, compressor stations, gas gathering and processing. Which areas are classified, and to what zone, is set by the site operator's own area classification drawings.

Is intrinsically safe the same as explosion proof?

Not exactly. Explosion proof is a broad everyday term; intrinsic safety is one protection concept, which limits energy so ignition cannot occur. Flameproof (Ex d) is a different concept that contains an explosion. The IS-04Z1 is intrinsically safe by design.

Which shale basins matter most for handset demand?

The Permian dominates, followed by the Eagle Ford and Bakken, which together made up about 93 percent of US tight oil in 2023. Each has a different climate, from hot and dusty West Texas to very cold North Dakota.

Why does the shale industry change demand so quickly?

Activity follows oil prices and drilling schedules, with many independent operators adjusting programs quickly. Suppliers usually need flexible stock and fast service, and buyers should agree lead times in advance.

Do Permian and Bakken operators apply the same equipment rules?

Not necessarily. Producers and field service contractors generally set their own equipment requirements, and the states have separate regulators for oil and gas. The IS-04Z1 has no certificate yet. Confirm requirements with the site operator in each basin.

Enquiry · US shale oil operations

Ask about the IS-04Z1 for US shale oil operations, United States

Send the site, zone and gas group and roughly how many handsets. We reply by email with the datasheet and the certification schedule.

Enquiry · US shale oil operations

Please enter your name.
Please enter your company name.
Enter a valid email address.
Please enter your target market.
Please select one.

Launching Q4 2026

Planning for US Shale Oil Operations?

Tell us the zone, gas group and operator. We will send the datasheet and the certification schedule.