China: rules and approvals
Explosion-protected electrical products in China need CCC certification, mandatory since 1 October 2020, to the GB/T 3836 series, which is China's adoption of IEC 60079.
The IS-04Z1 is an intrinsically safe handset for people who cross into classified areas in China every shift: oilfield and refinery operators, coal-mining safety officers, petrochemical engineers, and the HSE and telecoms teams who equip them. This page sets out how an intrinsically safe cell phone supply route to China will work for the IS-04Z1, and what is and is not available before launch.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. An intrinsically safe cell phone for China cannot be bought yet: the SAMS IS-04Z1 is pre-launch (certification in progress, no certificate issued), and the datasheet, certification schedule and safe-area evaluation units are available now.
Current position: certification in progress, nothing issued, launch targeted for Q4 2026. A buyer's engineering review is separate from the certificate. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Level of protection | ia, ib or ic matched to the zone | ib, for Zone 1 |
| Entity parameters | Uo, Io and Po within the device limits | Published with the certificate |
| Accessories | Chargers and cases certified with the device | Defined at certification |
| Where it applies | China: Zhoushan / Ningbo, Maoming, Shanxi | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in China. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
Operators and classified areas drawn from the SAMS China market guide.
Explosion-protected electrical products in China need CCC certification, mandatory since 1 October 2020, to the GB/T 3836 series, which is China's adoption of IEC 60079.
ATEX certificates and Eurasian certificates are not accepted in China, and the applicant for CCC may be a foreign company.
CNCA designated six certification bodies and 13 testing laboratories for Ex products, and an IECEx test report may serve as test evidence but does not replace the CCC certificate.
The Daqing field in Heilongjiang, discovered in 1959 in the Songhua Jiang-Liao basin, has been the backbone of Chinese oil production for decades, and Shengli began producing in 1968.
Intrinsic safety limits the electrical and thermal energy in a circuit so that neither a spark nor a hot surface can ignite a gas or dust atmosphere, even when a fault occurs. The ib level, used for Zone 1, tolerates one fault. It is the usual way to make a handheld device that a worker carries continuously through a hazardous area.
The IS-04Z1 is designed on this principle for Zone 1 and Zone 21 (marking target II 2 G Ex ib IIC T4). Intrinsic safety is a design basis, not a certificate: certification is in progress and none has been issued yet.
In China. A coal-mining shift or a petrochemical-plant round at Maoming or Zhoushan covers real distance with no recharging point inside a classified area. An intrinsically safe handheld is designed for those rounds, with a 4,000 mAh cell specified for a full shift, so inspections are not interrupted by the walk to a charger.
Supply of the IS-04Z1 to China starts only after certification, through authorised distributors. Until then a buyer can request the datasheet and the written certification schedule, and arrange a safe-area evaluation unit, which puts the site on the list for the right local channel at launch.
The technical specification, marking target and conditions of use, sent by email.
Which certificates are in progress, in what order, and what is still to be confirmed.
Evaluation units can be used for connectivity, MDM enrolment and workflow testing outside classified areas.
Tell us the site, zone, gas group and quantity so the right authorised distributor can contact you.
No. Nothing can be bought or taken into a classified area today: certification is in progress and launch is planned for Q4 2026. What is available now is the datasheet, the written certification schedule and evaluation units for safe-area use.
There is no list price yet. SAMS gives indicative pre-launch pricing in writing, against a stated quantity and site, and does not commit to a lead time before certification completes.
The circuits are designed to limit energy so a spark or hot surface cannot ignite a gas or dust atmosphere, even with one fault (level ib, Zone 1). Certification of that design is in progress.
The market guide for China covers Shanxi, Shaanxi and Inner Mongolia, Daqing, Shengli oilfield, among others. Site-level pages are linked below.
Through authorised distributors once certificates exist. Until then SAMS can send the datasheet and certification schedule and arrange safe-area evaluation units.
In addition to CCC where applicable, radio devices need SRRC approval and phones connecting to public networks need the MIIT network access licence. The NAL is described as compulsory, valid for three years, with local testing and a local representative. Confirm the current requirements with MIIT or an accredited body.
Products that fall within the explosion-protected electrical category of the CCC catalogue may not be sold, imported or used in business without a CCC certificate and mark, to the GB/T 3836 series. Check with a CNCA-designated body whether a given product falls within that catalogue scope.
No: Sinopec, PetroChina and the major coal producers each run their own equipment-approval and procurement process, so a device can be NEPSI-certified and still unlisted. NEPSI and SRRC are being pursued and are not finished. Confirm the listing route with the operator.
Related guides for China and for China.
Tell us what you need to equip and where. The SAMS team answers by email with the datasheet and where each certification route stands.
Name the site and the operator and we will send what is available before launch.