United States: rules and approvals
Full certification in the US includes quarterly factory inspections, while field certification offers an alternative for custom or low-volume equipment already at an installation.
United States · intrinsically safe
Intrinsically Safe Cell Phone Distributor in United States
The IS-04Z1 is built for people who work inside classified locations at American refineries, gas plants, terminals and wellsites, and for the HSE and IT teams who decide what goes through the gate. The National Electrical Code covers hazardous locations in Article 500 for the Class and Division system and in Articles 505 and 506 for the Zone system, as adopted by each state or authority. Distribution partners for United States are being identified ahead of the Q4 2026 launch of the IS-04Z1.
Pre-launch · certification in progress · Launching Q4 2026
Marking targetEx ib IIC T4Intrinsic safety, Zone 1 / 21 design target · certification in progress
AvailabilityQ4 2026via authorised distributors
Search topicintrinsically safe
DeviceCell Phone
RouteDistribution
WhereUnited States
Short answer. United States has no appointed SAMS distributor yet: the IS-04Z1 is pre-launch (certification in progress, no certificate issued, launch planned for Q4 2026), and distributor applications are open.
Where things stand: the IS-04Z1 has not launched, and none of its four certification routes has produced a certificate yet. A buyer's engineering review is separate from the certificate. Certification status. Place facts reviewed October 2026.
At a glance · intrinsically safe
Checklist: intrinsically safe cell phone for United States
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Level of protection | ia, ib or ic matched to the zone | ib, for Zone 1 |
| Entity parameters | Uo, Io and Po within the device limits | Published with the certificate |
| Accessories | Chargers and cases certified with the device | Defined at certification |
| Where it applies | United States: Beaumont and Port Arthur, Lake Charles and Calcasieu, Baton Rouge corridor | Classified by the site operator |
Product · United States
The product behind this search: the SAMS IS-04Z1.
SAMS IS-04Z1
An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in United States. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
- IP68 sealed
- 4,000 mAh battery
- 50 MP camera
- Android 16
- Zone 1 / Zone 21 design target
The market · United States
Hazardous-area industry in United States
The main operators, industrial areas and sites that the SAMS United States market guide covers.
Operators, EPCs and contractors
- ExxonMobil
- Baytown and Beaumont complexes, Permian acreage
- Chevron
- Permian operations, Pascagoula refinery, Anchor deepwater
- Shell USA
- Mars and Ursa hubs, Vito and Whale platforms
- bp America
- Thunder Horse, Whiting refinery, Kaskida development
- ConocoPhillips
- Permian and Eagle Ford, Alaska North Slope
- Marathon Petroleum
- Galveston Bay and Garyville refineries, MPLX midstream
Industrial areas and sites
- Permian Basin
- Midland and Delaware sub-basins, the largest US oil region
- Houston Ship Channel
- Baytown, Deer Park and Pasadena refining and chemicals
- Beaumont and Port Arthur
- Motiva, ExxonMobil and Valero refining on the Sabine
- Lake Charles and Calcasieu
- Refining, chemicals and LNG export in Louisiana
- Baton Rouge corridor
- Refining and chemical plants toward Plaquemine
- Corpus Christi
- Refining, crude export docks and LNG trains
Field notes · United States
More about United States that matters for portable equipment
United States: rules and approvals
The FCC regulates radio frequency devices between 9 kHz and 3000 GHz, and most radio-containing products must follow an equipment authorisation procedure before being marketed.
United States: rules and approvals
Zone-rated equipment in the US carries the AEx marking, for example Class I, Zone 0, AEx ia IIC T6, so a datasheet showing only ATEX or IECEx marks does not show US approval.
United States: rules and approvals
US workplace rules accept electrical equipment in explosive atmospheres only if it is approved by an OSHA-recognised NRTL, and OSHA states that the NRTL's specific mark is required, so CE and ATEX do not count.
The term · intrinsically safe
What “intrinsically safe” means for a smartphone
Intrinsic safety limits the electrical and thermal energy in a circuit so that neither a spark nor a hot surface can ignite a gas or dust atmosphere, even when a fault occurs. The ib level, used for Zone 1, tolerates one fault. It is the usual way to make a handheld device that a worker carries continuously through a hazardous area.
The IS-04Z1 is designed on this principle for Zone 1 and Zone 21 (marking target II 2 G Ex ib IIC T4). Intrinsic safety is a design basis, not a certificate: certification is in progress and none has been issued yet.
In United States. Intrinsic safety suits pumper routes and compressor stations where hours separate charging points, and the long rounds at Gulf Coast refineries. A handheld that limits ignition energy lets a worker record, photograph and communicate with one hand free, which matters with gloves, fixed ladders and permit paperwork.
The route · distribution
Distributing the IS-04Z1 in United States
A distributor for United States would carry the IS-04Z1 after certification completes; the Q4 2026 launch is the planning date and no appointment has been made. SAMS reviews applicants one by one and prefers companies with their own Ex-competent technical and service staff, since certified devices must not be repaired outside approved channels.
What SAMS looks for in a partner
- Operator relationships
- Existing supplier registrations or a clear route to them with the main operators and contractors in United States.
- Ex-competent staff
- People who understand zone classification, markings and the conditions of a certificate.
And equally important
- Local-language support
- Documentation, training and helpdesk in the languages the workforce uses.
- Service capability
- Spares, battery replacement and repair routed through SAMS-approved channels.
Questions · United States
Frequently asked questions
Can we buy an intrinsically safe cell phone in United States today?
No. Nothing can be bought or taken into a classified area today: certification is in progress and launch is planned for Q4 2026. What is available now is the datasheet, the written certification schedule and evaluation units for safe-area use.
What does an intrinsically safe cell phone in United States cost?
No price is published. While certification is in progress there is no list price and no committed lead time, and a supplier quoting a firm figure for an uncertified Ex handset is promising something it cannot stand behind. Indicative pre-launch pricing is issued in writing against a stated quantity and site.
What does ‘intrinsically safe’ mean for the IS-04Z1?
The circuits are designed to limit energy so a spark or hot surface cannot ignite a gas or dust atmosphere, even with one fault (level ib, Zone 1). Certification of that design is in progress.
Which sites in United States does this cover?
The market guide for United States covers Permian Basin, Houston Ship Channel, Beaumont and Port Arthur, Lake Charles and Calcasieu, among others. Site-level pages are linked below.
How do I become a SAMS distributor for United States?
Apply through the distributor page with your company details and the territory you cover. SAMS reviews applications company by company and has not yet granted a territory for United States.
What conditions affect devices in the Permian Basin?
The basin is dry and sparsely built, so summer heat, dust and long drives between sites are typical. Check the operating temperature range, dust ingress rating and battery life, and confirm any operator-specific site rules, including permits and gas detection practice, with the company controlling the lease.
What FCC approval does a smartphone need in the United States?
Radio-containing devices such as phones normally need FCC equipment authorisation, either by certification through an approved body or a supplier's declaration depending on the device type. Check the FCC rules and consult an accredited test lab or telecommunication certification body for your product's category.
Does the handset cover Class II dust areas in the US?
The Zone 21 design target covers dust at sulfur handling, coal transfer and solids charging, but certification is in progress and no listing exists. Check which Class and Division the final listing covers against your facility's own classification before use.
Related guides
Keep exploring
Other guides for United States, other places in United States, and the pages behind them.
Industrial Mobile Phone Supplier in United StatesSame place, different guide
Ex-Proof Mobile Phone Distributor in United StatesSame place, different guide
ATEX and IECEx Mobile Phone Distributor in United StatesSame place, different guide
Hazardous Area Mobile Phone Supplier in United StatesSame place, different guide
NEC 500 Class I Division 1 Mobile Phone Supplier in United StatesSame place, different guide
Explosion-Proof Mobile Phone Distributor in United StatesSame place, different guide
United States market guideCertification route and regulators
All guides for United StatesEvery route we cover
Certification statusWhat is in progress
Enquiry · United States
Ask about the IS-04Z1 for United States
Share the site details and quantity. You will get the datasheet and the certification schedule back by email; pricing is indicative only until launch.
Enquiry · United States
Launching Q4 2026
Planning for United States?
Tell us the zone, gas group and operator. We will send the datasheet and the certification schedule.