Australia: rules and approvals
An IECEx certificate for an assembly of several items is not automatically accepted unless it is validated against the current AS/NZS 60079.14 or the assembly is independently inspected.
A Zone 1 / Zone 21 smartphone for crews on Australian LNG trains, offshore facilities, processing plants and remote mine sites. This page explains what to look for in an IECEx cell phone for Australia, and where the IS-04Z1 stands against that list today.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. The SAMS IS-04Z1 is the intrinsically safe smartphone covered here for Australia: pre-launch, designed for Zone 1 and Zone 21 (marking target Ex ib IIC T4), with certification in progress and no certificate issued.
Where things stand: the IS-04Z1 has not launched, and none of its four certification routes has produced a certificate yet. An operator's own vendor approval is a separate step. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Certificate of conformity | Number checkable on the IECEx online register | In progress; not issued |
| Standards edition | The IEC 60079 edition the certificate cites | Stated on the certificate when issued |
| Schedule of conditions | Limits of use, batteries and accessories | Published with the certificate |
| Where it applies | Australia: Karratha and the Burrup Peninsula, Onslow, Western Australia, Darwin | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Australia. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
Operators and classified areas drawn from the SAMS Australia market guide.
An IECEx certificate for an assembly of several items is not automatically accepted unless it is validated against the current AS/NZS 60079.14 or the assembly is independently inspected.
Australia works on the IECEx scheme and the AS/NZS 60079 series, and the national ANZEx scheme is harmonised with IECEx, so IECEx-certified equipment can be used almost without separate national testing.
The Australian Communications and Media Authority regulates the supply of radiocommunications equipment and made rule changes in 2023 to simplify and streamline that regulation.
An ATEX marking alone is not automatically accepted, because ATEX is an EU directive that allows self-declaration for some categories, and such equipment usually needs a conformity assessment.
IECEx is the international scheme for certifying equipment used in explosive atmospheres. A certificate of conformity is issued by an accredited certification body against a specific edition of the IEC 60079 standards and carries a schedule of conditions of safe use. It is not a legal requirement in most countries on its own, but many national schemes accept it as the technical basis.
The IECEx certificate for the IS-04Z1 is in progress and has not been issued. The marking target is Ex ib IIC T4, the intrinsic safety concept for Zone 1 gas with the hardest gas group (IIC) and a 135 °C temperature class.
In Australia. Australia takes part directly in the IECEx system, and AS/NZS 60079 is harmonised with IEC 60079, so the certificate of conformity is the practical basis for equipment at Woodside, Chevron, INPEX, Shell and Santos sites. The reviewer reads the schedule of conditions for ambient range and special conditions. The ANZEx certificate would follow from the same test reports.
A short checklist for anyone writing or reviewing the specification, with the IS-04Z1 status against each point.
Not yet. The IS-04Z1 is pre-launch and its certification is still in progress ahead of a Q4 2026 launch. No unit goes into a classified area before the certificate covering it exists. The datasheet, the certification schedule and safe-area evaluation units are available now.
There is no list price yet. SAMS gives indicative pre-launch pricing in writing, against a stated quantity and site, and does not commit to a lead time before certification completes.
No. The IECEx certificate is in progress and has not been issued. SAMS will publish the number when it exists.
The market guide for Australia covers Karratha and the Burrup Peninsula, Onslow, Western Australia, Darwin, Gladstone and Curtis Island, among others. Site-level pages are linked below.
Not exactly. Explosion proof is a broad everyday term; intrinsic safety is one protection concept, which limits energy so ignition cannot occur. Flameproof (Ex d) is a different concept that contains an explosion. The IS-04Z1 is intrinsically safe by design.
Often yes. An IECEx certificate for an assembly is not automatically accepted unless validated against the current AS/NZS 60079.14 or the assembly is independently inspected. Ask the site engineer or an inspection body how a packaged or modular system will be treated before shipping.
Yes. Australia accepts a current IECEx or ANZEx Certificate of Conformity under the AS/NZS 60079 series, with the gas group and temperature class matching the classified area. ATEX-only equipment is not automatically accepted. Confirm the installation documentation expected for your site with the operator's electrical engineer.
No: underground coal equipment is Group I, regulated at state level, which is a different regime from the Group II surface certification the IS-04Z1 targets. Surface coal handling with Zone 21 dust, and gas areas at LNG and processing plants, are the intended duty. Check the classification with the mine operator and regulator.
More on Australia, and on other places in Australia.
Share the site details and quantity. You will get the datasheet and the certification schedule back by email; pricing is indicative only until launch.
Send the zone and gas group of your site and we will reply with the datasheet and schedule.