United States: rules and approvals
Full certification in the US includes quarterly factory inspections, while field certification offers an alternative for custom or low-volume equipment already at an installation.
United States · hazardous area
Hazardous Area Smartphone Distributor in United States
The IS-04Z1 is built for people who work inside classified locations at American refineries, gas plants, terminals and wellsites, and for the HSE and IT teams who decide what goes through the gate. US workplace rules accept electrical equipment in explosive atmospheres only if it is approved by an OSHA-recognised NRTL, and OSHA states that the NRTL's specific mark is required, so CE and ATEX do not count. Distribution partners for United States are being identified ahead of the Q4 2026 launch of the IS-04Z1.
Pre-launch · certification in progress · Launching Q4 2026
Marking targetEx ib IIC T4Intrinsic safety, Zone 1 / 21 design target · certification in progress
AvailabilityQ4 2026via authorised distributors
Search topichazardous area
DeviceSmartphone
RouteDistribution
WhereUnited States
Short answer. United States has no appointed SAMS distributor yet: the IS-04Z1 is pre-launch (certification in progress, no certificate issued, launch planned for Q4 2026), and distributor applications are open.
Current position: certification in progress, nothing issued, launch targeted for Q4 2026. A buyer's engineering review is separate from the certificate. Certification status. Place facts reviewed October 2026.
At a glance · hazardous area
Checklist: hazardous area smartphone for United States
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Zone | 0, 1 or 2 for gas; 20, 21 or 22 for dust | Designed for Zone 1 and Zone 21 |
| Gas group | IIA, IIB or IIC | IIC (target) |
| Area drawing | The operator's own classification drawing | Decided by the site operator |
| Where it applies | United States: Beaumont and Port Arthur, Lake Charles and Calcasieu, Baton Rouge corridor | Classified by the site operator |
Product · United States
The product behind this search: the SAMS IS-04Z1.
SAMS IS-04Z1
An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in United States. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
- IP68 sealed
- 4,000 mAh battery
- 50 MP camera
- Android 16
- Zone 1 / Zone 21 design target
The market · United States
Hazardous-area industry in United States
The main operators, industrial areas and sites that the SAMS United States market guide covers.
Operators, EPCs and contractors
- ExxonMobil
- Baytown and Beaumont complexes, Permian acreage
- Chevron
- Permian operations, Pascagoula refinery, Anchor deepwater
- Shell USA
- Mars and Ursa hubs, Vito and Whale platforms
- bp America
- Thunder Horse, Whiting refinery, Kaskida development
- ConocoPhillips
- Permian and Eagle Ford, Alaska North Slope
- Marathon Petroleum
- Galveston Bay and Garyville refineries, MPLX midstream
Industrial areas and sites
- Permian Basin
- Midland and Delaware sub-basins, the largest US oil region
- Houston Ship Channel
- Baytown, Deer Park and Pasadena refining and chemicals
- Beaumont and Port Arthur
- Motiva, ExxonMobil and Valero refining on the Sabine
- Lake Charles and Calcasieu
- Refining, chemicals and LNG export in Louisiana
- Baton Rouge corridor
- Refining and chemical plants toward Plaquemine
- Corpus Christi
- Refining, crude export docks and LNG trains
Field notes · United States
More about United States that matters for portable equipment
United States: rules and approvals
The National Electrical Code covers hazardous locations in Article 500 for the Class and Division system and in Articles 505 and 506 for the Zone system, as adopted by each state or authority.
United States: rules and approvals
The FCC regulates radio frequency devices between 9 kHz and 3000 GHz, and most radio-containing products must follow an equipment authorisation procedure before being marketed.
United States: rules and approvals
Zone-rated equipment in the US carries the AEx marking, for example Class I, Zone 0, AEx ia IIC T6, so a datasheet showing only ATEX or IECEx marks does not show US approval.
The term · hazardous area
What “hazardous area” means for a smartphone
A hazardous area is a place where flammable gas, vapour or combustible dust may be present. Standards divide these into zones: Zones 0, 1 and 2 for gas and vapour, and Zones 20, 21 and 22 for dust. Zone 1 and Zone 21 are the tier where an explosive atmosphere is likely to occur in normal operation, which is where the IS-04Z1 is designed to work. Anything carried in must be marked for the zone, gas group and temperature class of the area.
No certificate has been issued for the IS-04Z1 yet, so it must not be taken into a classified area until the certificate covering it exists and the site operator has accepted it.
In United States. US classified areas range from the Permian and Williston basins to the Houston Ship Channel, Beaumont, Lake Charles, Baton Rouge, Corpus Christi, the Alaska North Slope and the deepwater Gulf. The operator or owner classifies each location. SAMS does not classify any area and designs only for a stated one.
The route · distribution
Distributing the IS-04Z1 in United States
SAMS is appointing authorised distributors ahead of the Q4 2026 launch. No territory has been granted for United States yet and applications are reviewed company by company. Because a certified Ex device cannot be opened by an ordinary phone workshop without invalidating its certificate, SAMS looks for partners who can provide competent technical support and after-sales service locally.
What SAMS looks for in a partner
- Operator relationships
- Existing supplier registrations or a clear route to them with the main operators and contractors in United States.
- Ex-competent staff
- People who understand zone classification, markings and the conditions of a certificate.
And equally important
- Local-language support
- Documentation, training and helpdesk in the languages the workforce uses.
- Service capability
- Spares, battery replacement and repair routed through SAMS-approved channels.
Questions · United States
Frequently asked questions
Can we buy a hazardous area smartphone in United States today?
No. Nothing can be bought or taken into a classified area today: certification is in progress and launch is planned for Q4 2026. What is available now is the datasheet, the written certification schedule and evaluation units for safe-area use.
What does a hazardous area smartphone in United States cost?
There is no list price yet. SAMS gives indicative pre-launch pricing in writing, against a stated quantity and site, and does not commit to a lead time before certification completes.
Which hazardous areas is the IS-04Z1 designed for?
Zone 1 and Zone 21 (gas and dust) with gas group IIC and temperature class T4, subject to certification. It must not be used in a classified area before its certificate is issued and the site has accepted it.
Which sites in United States does this cover?
The market guide for United States covers Permian Basin, Houston Ship Channel, Beaumont and Port Arthur, Lake Charles and Calcasieu, among others. Site-level pages are linked below.
How do I become a SAMS distributor for United States?
Apply through the distributor page with your company details and the territory you cover. SAMS reviews applications company by company and has not yet granted a territory for United States.
What conditions affect devices in the Permian Basin?
The basin is dry and sparsely built, so summer heat, dust and long drives between sites are typical. Check the operating temperature range, dust ingress rating and battery life, and confirm any operator-specific site rules, including permits and gas detection practice, with the company controlling the lease.
What FCC approval does a smartphone need in the United States?
Radio-containing devices such as phones normally need FCC equipment authorisation, either by certification through an approved body or a supplier's declaration depending on the device type. Check the FCC rules and consult an accredited test lab or telecommunication certification body for your product's category.
Does the handset cover Class II dust areas in the US?
The Zone 21 design target covers dust at sulfur handling, coal transfer and solids charging, but certification is in progress and no listing exists. Check which Class and Division the final listing covers against your facility's own classification before use.
Related guides
Keep exploring
More on United States, and on other places in United States.
Ex-Proof Mobile Phone in United StatesSame place, different guide
Explosion-Proof Mobile Phone in United StatesSame place, different guide
NEC 500 Class I Division 1 Mobile Phone Distributor in United StatesSame place, different guide
Intrinsically Safe Mobile Phone Distributor in United StatesSame place, different guide
Industrial Mobile Phone in United StatesSame place, different guide
Rugged Mobile Phone in United StatesSame place, different guide
United States market guideCertification route and regulators
All guides for United StatesEvery route we cover
Certification statusWhat is in progress
Enquiry · United States
Ask about the IS-04Z1 for United States
Tell us what you need to equip and where. The SAMS team answers by email with the datasheet and where each certification route stands.
Enquiry · United States
Launching Q4 2026
Planning for United States?
Tell us the zone, gas group and operator. We will send the datasheet and the certification schedule.