Operators
Diamondback Energy is based in Midland and focuses on the Permian. ExxonMobil acquired Pioneer Natural Resources, a large Midland Basin acreage holder, on 3 May 2024.
The Permian Basin covers more than 86,000 square miles of West Texas and south-east New Mexico and is the highest-producing oil field in the United States. The Permian Basin is about 250 miles wide and 300 miles long, spans West Texas and southeastern New Mexico and is made up of more than 7,000 fields. If you are specifying a hazardous area mobile phone for Permian Basin, this page covers the markings, the approvals and the current certification status of the IS-04Z1.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. The SAMS IS-04Z1 is the intrinsically safe smartphone covered here for Permian Basin: pre-launch, designed for Zone 1 and Zone 21 (marking target Ex ib IIC T4), with certification in progress and no certificate issued.
Current position: certification in progress, nothing issued, launch targeted for Q4 2026. Operator approval runs on its own timeline. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Zone | 0, 1 or 2 for gas; 20, 21 or 22 for dust | Designed for Zone 1 and Zone 21 |
| Gas group | IIA, IIB or IIC | IIC (target) |
| Area drawing | The operator's own classification drawing | Decided by the site operator |
| Where it applies | Permian Basin: Drilling rigs, Wellsites and tank batteries, Compressor stations | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Permian Basin. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
Who operates there and which kinds of classified area a handset would meet, from the SAMS site research.
Diamondback Energy is based in Midland and focuses on the Permian. ExxonMobil acquired Pioneer Natural Resources, a large Midland Basin acreage holder, on 3 May 2024.
The climate is hot and arid, and sites are spread over long distances, so vehicle-based access is normal.
The wider Permian Basin accounts for nearly 40 percent of United States oil production and nearly 15 percent of its natural gas, according to figures cited by the Texas Railroad Commission.
The first commercial well in the basin came in at the Westbrook Field in Mitchell County in 1921, at a depth of about 2,500 feet.
The basin averaged about 4.2 million barrels of crude a day in 2019, making it the highest-producing oil field in the United States.
Midland, Odessa and San Angelo serve as headquarters for much of the basin's oil production activity, so most contractors and service firms are based there.
A hazardous area is a place where flammable gas, vapour or combustible dust may be present. Standards divide these into zones: Zones 0, 1 and 2 for gas and vapour, and Zones 20, 21 and 22 for dust. Zone 1 and Zone 21 are the tier where an explosive atmosphere is likely to occur in normal operation, which is where the IS-04Z1 is designed to work. Anything carried in must be marked for the zone, gas group and temperature class of the area.
No certificate has been issued for the IS-04Z1 yet, so it must not be taken into a classified area until the certificate covering it exists and the site operator has accepted it.
In Permian Basin. Classified areas here include drilling rigs, wellsites, tank batteries, compressor stations and gas processing plants. Producers such as Diamondback Energy and ExxonMobil, and the plant owners, classify their own sites. The Railroad Commission of Texas regulates oil and gas, but SAMS plays no role in classification.
A short checklist for anyone writing or reviewing the specification, with the IS-04Z1 status against each point.
Not today. Until the certificates are issued the IS-04Z1 stays out of classified areas, and until launch there is nothing to purchase. You can ask for the datasheet and the certification schedule, or book a safe-area evaluation unit.
SAMS has not published a price. Any figure you are offered for an uncertified Ex phone should be treated with caution; written indicative pricing is available for a defined quantity and site.
Zone 1 and Zone 21 (gas and dust) with gas group IIC and temperature class T4, subject to certification. It must not be used in a classified area before its certificate is issued and the site has accepted it.
Likely candidates are drilling rigs, wellsites and tank batteries, compressor stations, gas processing plants. Which areas are classified, and to what zone, is set by the site operator's own area classification drawings.
Not exactly. Explosion proof is a broad everyday term; intrinsic safety is one protection concept, which limits energy so ignition cannot occur. Flameproof (Ex d) is a different concept that contains an explosion. The IS-04Z1 is intrinsically safe by design.
It covers roughly 86,000 square miles across West Texas and New Mexico, so travel between sites can be long. Plan around the main service hubs of Midland and Odessa, and confirm the exact location and gate rules for each facility.
Wellpads, tank batteries, gas processing plants and compressor stations can all contain flammable gas and vapour. The operator classifies each location, and you should obtain the area drawings and approval requirements before taking any device there.
Yes, producers and service companies normally set their own equipment requirements. The Railroad Commission of Texas regulates oil and gas, but it does not approve handsets. The IS-04Z1 has no certificate yet. Confirm requirements with the site operator before any field trial.
More on Permian Basin, and on other places in United States.
Send the site, zone and gas group and roughly how many handsets. We reply by email with the datasheet and the certification schedule.
Send the zone and gas group of your site and we will reply with the datasheet and schedule.