Skip to content
Certification In Progress · Launching Q4 2026 Become a Distributor
Certification In Progress · Launching Q4 2026 Product Certifications Industries Blog About Contact Become a Distributor
PPL · explosion proof

Explosion-Proof Mobile Phone for PPL

Pakistan Petroleum Limited (PPL) is a Karachi-headquartered exploration and production company, 67.51 per cent government owned, best known for the Sui gas field in Balochistan. In December 2019 the company announced new oil and gas discoveries in Sindh and Balochistan, so new well sites and gathering facilities are being added in both provinces. If you are specifying an explosion proof mobile phone for PPL, this page covers the markings, the approvals and the current certification status of the IS-04Z1.

Pre-launch · certification in progress · Launching Q4 2026

SAMS IS-04Z1 intrinsically safe smartphone for PPL, front view
Marking targetEx ib IIC T4Intrinsic safety, Zone 1 / 21 design target · certification in progress
AvailabilityQ4 2026via authorised distributors
Search topicexplosion proof
DeviceMobile Phone
RouteSpecification
WherePPL

Short answer. The SAMS IS-04Z1 is the intrinsically safe smartphone covered here for PPL: pre-launch, designed for Zone 1 and Zone 21 (marking target Ex ib IIC T4), with certification in progress and no certificate issued.

For the record, no certificate exists for the IS-04Z1 today. The programme is under way ahead of a Q4 2026 launch. An operator's own vendor approval is a separate step. Certification status. Place facts reviewed October 2026.

At a glance · explosion proof

Checklist: explosion proof mobile phone for PPL

What to check, and where the IS-04Z1 stands today
CheckWhat to look forIS-04Z1 today
Protection conceptFlameproof (Ex d) or intrinsic safety (Ex i)Intrinsic safety, level ib
Zone suitabilityZone 1 gas and Zone 21 dustDesign target for Zone 1 and 21
CertificateNumber, issuing body and schedule of conditionsIn progress; not issued
Where it appliesPPL: Gas wellheads and gathering, Gas processing and compression plants, Condensate handlingClassified by the site operator
Product · Pakistan

The product behind this search: the SAMS IS-04Z1.

SAMS IS-04Z1 explosion proof mobile phone, front view

SAMS IS-04Z1

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Pakistan. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.

  • IP68 sealed
  • 4,000 mAh battery
  • 50 MP camera
  • Android 16
  • Zone 1 / Zone 21 design target
The organisation · PPL

Working with Pakistan Petroleum Limited: sites and classified areas

The main sites and the hazardous-area types a portable device is likely to meet at this organisation.

Sites and areas

  • Mazarani
  • Adhi
  • Chachar (Sindh)
  • Hala

Classified areas

  • Gas wellheads and gathering
  • Gas processing and compression plants
  • Condensate handling
Supplier approval · PPL

Supplier registration at PPL

PPL runs an e-procurement portal (eprocurement.ppl.com.pk) through which tenders are issued and bids submitted; confirm vendor registration steps with its support team. The Ex certificate and an organisation's own vendor or engineering approval are two separate timelines; SAMS is working towards both and holds neither today.

Field notes · PPL

More about PPL that matters for portable equipment

PPL: who works there

The Sui gas field, discovered in 1952, is the company's flagship project and is in a depletion phase, with PPL as operator holding 100% of both Sui and Kandhkot.

PPL: rules and approvals

The company was listed on the Karachi Stock Exchange in 2004 after an initial public offering, so it follows listed-company governance and procurement disclosure rules.

PPL: background

Pakistan Petroleum Limited was incorporated on 5 June 1950, inheriting the assets of the Burmah Oil Company, which sold its remaining equity to the government in 1997, so it is a long-established producer.

PPL: background

The Kandhkot gas field was discovered in 1959, but production did not start until 1987 because of low demand, showing a long gap between discovery and development.

The term · explosion proof

What “explosion proof” means for a smartphone

“Explosion proof” is the phrase most buyers use for equipment that may be taken into a classified hazardous area. Strictly, it covers several protection concepts: a flameproof enclosure (Ex d) contains an internal explosion, while intrinsic safety (Ex i) limits electrical energy so that an ignition cannot start. Phones are normally intrinsically safe, because a flameproof handset would be too heavy to carry all shift.

The IS-04Z1 uses intrinsic safety, with a marking target of Ex ib IIC T4, and is designed for Zone 1 and Zone 21. It is pre-launch, certification is in progress and no certificate has been issued.

In PPL. Gas gathering and condensate handling bring the question of what explosion-proof actually means. Flameproof Ex d is a heavy-enclosure concept for fixed electrical equipment, while intrinsic safety limits energy in portable electronics. A phone used near condensate handling relies on intrinsic safety, with the target marking II 2 G Ex ib IIC T4, once certified.

The route · specification

Specifying an explosion proof mobile phone for PPL

A short checklist for anyone writing or reviewing the specification, with the IS-04Z1 status against each point.

Check on the paper

Marking
Equipment group, category, protection concept, gas group and temperature class, matched to the area drawing.
Certificate and schedule
A certificate number, issuing body and the schedule of conditions, not a brochure claim.
Standards edition
The IEC 60079 or national standard edition the certificate was issued against.

Check for the IS-04Z1

Marking target
II 2 G Ex ib IIC T4: a target, not yet a certificate.
Certificate status
IECEx, ATEX, UKEX and NEC 500 in progress; none issued.
Operator approval
Separate from the certificate and handled with the site operator.
Questions · PPL

Frequently asked questions

Can PPL buy the IS-04Z1 today?

No. Nothing can be bought or taken into a classified area today: certification is in progress and launch is planned for Q4 2026. What is available now is the datasheet, the written certification schedule and evaluation units for safe-area use.

What does an explosion proof mobile phone for PPL cost?

No price is published. While certification is in progress there is no list price and no committed lead time, and a supplier quoting a firm figure for an uncertified Ex handset is promising something it cannot stand behind. Indicative pre-launch pricing is issued in writing against a stated quantity and site.

Is the IS-04Z1 explosion proof or intrinsically safe?

It is intrinsically safe (marking target Ex ib IIC T4), which is the usual way to make a phone for hazardous areas. It is not a flameproof (Ex d) design, and certification is still in progress.

How does PPL approve suppliers?

PPL runs an e-procurement portal (eprocurement.ppl.com.pk) through which tenders are issued and bids submitted; confirm vendor registration steps with its support team.

Is intrinsically safe the same as explosion proof?

Not exactly. Explosion proof is a broad everyday term; intrinsic safety is one protection concept, which limits energy so ignition cannot occur. Flameproof (Ex d) is a different concept that contains an explosion. The IS-04Z1 is intrinsically safe by design.

How do suppliers approach PPL?

PPL buys through its own procurement department, normally by tender and vendor registration, with technical review by the operating asset. Confirm the current process and certification requirements directly with PPL's procurement before offering equipment.

How does desert heat affect phones used at Sui or Kandhkot?

Both areas are hot and dry, with high summer temperatures and dust. Handheld devices should have a suitable operating temperature range, good dust protection and a battery that tolerates heat, and the site can confirm its own limits and any restrictions on devices in direct sun.

Would the phone be suitable for gas fields in Balochistan and Sindh?

The IS-04Z1 is designed for intrinsically safe handheld use with IP68 protection, but a final decision depends on the certificate, the gas group and the area classification at each field. Heat, dust and distance from charging points should be planned for. No certificate has been issued yet, so ask PPL's HSE team.

Enquiry · PPL

Ask about the IS-04Z1 for PPL, Pakistan

Send the site, zone and gas group and roughly how many handsets. We reply by email with the datasheet and the certification schedule.

Enquiry · PPL

Please enter your name.
Please enter your company name.
Enter a valid email address.
Please enter your target market.
Please select one.

Launching Q4 2026

Planning for PPL?

Send the zone and gas group of your site and we will reply with the datasheet and schedule.