Fields
Drilling shifted west as eastern fields such as East Texas, discovered in 1930, declined. The Permian Basin now dominates onshore output.
Texas is the largest US crude oil producer, with onshore fields concentrated in the Permian Basin in the west and the historic East Texas field. The Permian Basin of West Texas alone supplies nearly 40 percent of US oil production, which explains why Midland and Odessa dominate equipment demand. An ATEX and IECEx smartphone distributor in Texas oil and gas fields would carry the IS-04Z1 to these buyers once certification completes.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. Texas oil and gas fields has no appointed SAMS distributor yet: the IS-04Z1 is pre-launch (certification in progress, no certificate issued, launch planned for Q4 2026), and distributor applications are open.
Where things stand: the IS-04Z1 has not launched, and none of its four certification routes has produced a certificate yet. An operator's own vendor approval is a separate step. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Marking | II 2 G Ex ib IIC T4 on the rating plate | Design target; not yet marked |
| EU-type examination certificate | Notified body number and certificate ID | In progress with TÜV; not issued |
| IECEx certificate of conformity | Number listed on the IECEx online register | In progress; not issued |
| Where it applies | Texas oil and gas fields: Compressor stations, Gas processing plants, Wellsites and tank batteries | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Texas Oil Fields. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
Who operates there and which kinds of classified area a handset would meet, from the SAMS site research.
Drilling shifted west as eastern fields such as East Texas, discovered in 1930, declined. The Permian Basin now dominates onshore output.
The Railroad Commission of Texas oversees oil and gas exploration, production and transport, including hydrogen sulphide safety.
Texas produced about 41 percent of national crude oil and 25 percent of national natural gas in 2019, and is the largest state producer of both.
As wells in the east of the state depleted, drilling moved westward, and today the busiest activity is in West Texas and under the Gulf of Mexico.
Thirty refineries operating in January 2019 made up 31 percent of national refining capacity, so oilfield and refinery work is closely linked.
The first major Spindletop well was drilled on 10 January 1901, and the East Texas Oil Field, found in 1930, is the largest and most prolific oil reservoir in the contiguous United States.
ATEX is the European legal framework for equipment used in explosive atmospheres (Directive 2014/34/EU). IECEx is the international certification scheme built on the IEC 60079 standards. Buyers outside Europe often ask for both: an IECEx certificate is the technical evidence most national regimes build on, while ATEX is the legal route into the European market.
For the IS-04Z1 both routes are in progress with TÜV in Germany and neither certificate has been issued. The marking target is II 2 G Ex ib IIC T4: equipment Group II (surface industry), Category 2 (Zone 1 gas), protection concept ib (intrinsic safety), gas group IIC and temperature class T4.
In Texas oil and gas fields. Texas oil and gas work spans the Permian Basin and historic fields such as East Texas, with producers that sometimes work abroad too. A reviewer may look for dual ATEX and IECEx evidence to reuse one record internationally. The IS-04Z1 certification is in progress and no certificate has been issued.
Distribution of the IS-04Z1 is by authorised partners only, and SAMS has not yet granted a territory for Texas oil and gas fields. Each application is reviewed on its merits. Because opening a certified Ex handset in an ordinary workshop invalidates its certificate, the partner must be able to support and service the device locally.
No. Nothing can be bought or taken into a classified area today: certification is in progress and launch is planned for Q4 2026. What is available now is the datasheet, the written certification schedule and evaluation units for safe-area use.
SAMS has not published a price. Any figure you are offered for an uncertified Ex phone should be treated with caution; written indicative pricing is available for a defined quantity and site.
Not yet. Both routes are in progress with TÜV in Germany and no certificate has been issued. Any listing that says otherwise is wrong.
Likely candidates are wellsites and tank batteries, drilling rigs, compressor stations, gas processing plants. Which areas are classified, and to what zone, is set by the site operator's own area classification drawings.
Apply through the distributor page with your company details and the territory you cover. SAMS reviews applications company by company and has not yet granted a territory for Texas oil and gas fields.
The Railroad Commission of Texas regulates oil and gas production, pipelines and LPG safety, while each operator sets its own electrical safety and equipment rules. For equipment approvals, ask the operator which marks and standards they accept.
US sites commonly use the National Electrical Code, which includes both a Class and Division approach and a Zone approach, and equipment is typically tested by a recognised US laboratory. The operator's area classification is the deciding document.
Classification is site-specific, whatever the field's age. A wellsite, tank battery, compressor station or gas plant each has its own classification and drawings. Compare the IS-04Z1 target marking against each, and ask the operator about permit rules. Certification is still in progress.
More on Texas Oil Fields, and on other places in United States.
Share the site details and quantity. You will get the datasheet and the certification schedule back by email; pricing is indicative only until launch.
Send the zone and gas group of your site and we will reply with the datasheet and schedule.