Other industry
Valero completed a petrochemical expansion in the city. Golden Pass LNG at nearby Sabine Pass, Texas, reported its first export cargo on 22 April 2026.
Port Arthur lies on the Sabine-Neches waterway in the Texas Golden Triangle and is centred on oil refining and petrochemicals. Port Arthur lies 90 miles east of Houston on the west side of Sabine Lake, with the Rainbow Bridge across the Neches River connecting it to Bridge City. An ATEX and IECEx smartphone distributor in Port Arthur, Texas would carry the IS-04Z1 to these buyers once certification completes.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. Port Arthur, Texas has no appointed SAMS distributor yet: the IS-04Z1 is pre-launch (certification in progress, no certificate issued, launch planned for Q4 2026), and distributor applications are open.
Current position: certification in progress, nothing issued, launch targeted for Q4 2026. An operator's own vendor approval is a separate step. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Marking | II 2 G Ex ib IIC T4 on the rating plate | Design target; not yet marked |
| EU-type examination certificate | Notified body number and certificate ID | In progress with TÜV; not issued |
| IECEx certificate of conformity | Number listed on the IECEx online register | In progress; not issued |
| Where it applies | Port Arthur, Texas: Tank farms, Marine terminals, Refinery process units | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Port Arthur. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
A short profile of the site and the kinds of classified area that matter for portable equipment.
Valero completed a petrochemical expansion in the city. Golden Pass LNG at nearby Sabine Pass, Texas, reported its first export cargo on 22 April 2026.
The Gulf Coast location is hot and humid with hurricane exposure, which shapes turnaround scheduling.
A separate steam cracker of 1 million tonnes a year, a joint venture with BASF, now runs mainly on locally produced ethane and butane.
The Motiva Port Arthur refinery covers about 1,400 acres, started in 1903 on 25 acres at 850 barrels a day and is described by its operator as the largest refinery in North America.
Port Arthur is tied with Lake Charles and Astoria as the most humid city in the contiguous United States, with relative humidity around 90 percent in the morning.
Motiva also runs the largest base oil plant in the Western Hemisphere, with a base oil capacity of 40,000 barrels a day supplied to customers in more than 15 countries.
ATEX is the European legal framework for equipment used in explosive atmospheres (Directive 2014/34/EU). IECEx is the international certification scheme built on the IEC 60079 standards. Buyers outside Europe often ask for both: an IECEx certificate is the technical evidence most national regimes build on, while ATEX is the legal route into the European market.
For the IS-04Z1 both routes are in progress with TÜV in Germany and neither certificate has been issued. The marking target is II 2 G Ex ib IIC T4: equipment Group II (surface industry), Category 2 (Zone 1 gas), protection concept ib (intrinsic safety), gas group IIC and temperature class T4.
In Port Arthur, Texas. Port Arthur's refining and petrochemical operators include globally owned companies, so a procurement reviewer may expect certificate evidence that is portable across their international sites. A dual ATEX and IECEx route is designed for that. The IS-04Z1 certification is in progress, and no certificate has been issued.
SAMS is appointing authorised distributors ahead of the Q4 2026 launch. No territory has been granted for Port Arthur, Texas yet and applications are reviewed company by company. Because a certified Ex device cannot be opened by an ordinary phone workshop without invalidating its certificate, SAMS looks for partners who can provide competent technical support and after-sales service locally.
No. Nothing can be bought or taken into a classified area today: certification is in progress and launch is planned for Q4 2026. What is available now is the datasheet, the written certification schedule and evaluation units for safe-area use.
No price is published. While certification is in progress there is no list price and no committed lead time, and a supplier quoting a firm figure for an uncertified Ex handset is promising something it cannot stand behind. Indicative pre-launch pricing is issued in writing against a stated quantity and site.
Not yet. Both routes are in progress with TÜV in Germany and no certificate has been issued. Any listing that says otherwise is wrong.
Likely candidates are refinery process units, petrochemical plants, tank farms, marine terminals. Which areas are classified, and to what zone, is set by the site operator's own area classification drawings.
Apply through the distributor page with your company details and the territory you cover. SAMS reviews applications company by company and has not yet granted a territory for Port Arthur, Texas.
Port Arthur is among the most humid places in the contiguous United States, with morning humidity near 90 percent. Condensation inside poorly sealed devices is a real risk, so choose sealed housings and follow the maker's care instructions.
Large refineries run planned turnarounds that bring thousands of contractors on site for a limited period. Operators typically plan equipment and induction well in advance, so contact the site's maintenance planners early and confirm approval requirements.
Port Arthur is hot and humid with hurricane exposure, which shapes turnaround scheduling. A rugged IP68 phone helps with water and dust, and managed enrolment lets a contractor lock or recover devices when a site closes. Store and charge devices in safe areas away from classified plant.
More on Port Arthur, and on other places in United States.
Tell us what you need to equip and where. The SAMS team answers by email with the datasheet and where each certification route stands.
Send the zone and gas group of your site and we will reply with the datasheet and schedule.